Have a look in the BMW tool kit in the boot, there should be a tool in there to take them off.
If not please refer to manual in the glove box.
just wanna check if anyone on here can help me out...
ive got a 3 series bmw and the wheels have a centre cap which doestn seem to just pop off ...its covering the wheel nuts so it needs to be removed.
any ideas would be great help
thanks
Have a look in the BMW tool kit in the boot, there should be a tool in there to take them off.
If not please refer to manual in the glove box.
Hammer?
depends some have a locking center cap which have a big hex nut (obvious) there is a tool for this in the boot if its not there use a big pair of stilsons (adj pliyers bit rough) some have a aluminium cap which just takes a gd hit what model 3 series is it
BBS style wheel? You need either a massive socket or the BMW centrecap removal tool. The cap screws off.
But I think there are some caps that just lever off.
Just grab the huge nut lookin thing and try to unscrew it. Some unscrew about 1/3 rotation and pop out, others are a threaded section...
Good luck.
J.
yeh they are bbs style,
its a 318i
got no tools with in the boot but, its rusted out they probs fell out haha
ill see what kinda adj plier clamping things dads got
cheers for the help, never thought it would be screw on.
jesse.