You will want the gear ratio of your speedo gears to be similar to what your T50 originaly had in it, since you also have a similar diff ratio.
If your interested, you should first see what speedo gears you have in your gearbox.
what would i use for a w58 gear box with a 3.9 diff with 195/50/r15
Originally Posted by cicca_294
my dads mate is getting one, in white, aus delivered.
his mate has an imported on in white,
and their mate has a blood red one with a 25k new exhaust system...
i wish i had enough money for a freaking corolla
You will want the gear ratio of your speedo gears to be similar to what your T50 originaly had in it, since you also have a similar diff ratio.
If your interested, you should first see what speedo gears you have in your gearbox.
I'm a little confused. i have a 3.9:1 ratio diff and am using a adm cluster. i want to use a jdm cluster.
is the speedo drive gear inside the cluster?
You should not have to change anything. Both clusters are the same as far as I remember, unless I said otherwise elsewhere.
The speedo drive gears we are talking about is at the back of the gearbox.
So does anyone know how to replace the internal worm gear? Pull out the outer one and its in perfect nick, and the speedo cable isnt broken but the speedo just still isn't working.
RT142 Estate.
AJPS.
It wont be the internal gear, it is made of steel. Whereas the other gear is plastic. Possibly the cable isn't clipped into the back of the cluster properly. Try driving the car with the cluster out and check the cable turns.
The shaft isn't broken on the end of the worm drive from the gearbox?
Ill check both, cheers!
RT142 Estate.
AJPS.