Results 1 to 10 of 23

Thread: Front Brake Upgrade: RX7 4 Piston caliper and 276mm Rotor

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Oly AE86's Avatar
    Join Date
    Dec 2008
    Name
    Oliver
    State
    QLD
    Location
    Logan Shire
    Country
    Australia
    Posts
    357

    Default Front Brake Upgrade: RX7 4 Piston caliper and 276mm Rotor

    AE86 Brake Upgrade Using RX7 FC3S Calipers.

    Items required:

    Brake Calipers, 1990 Approx RX7 Series 4/5 Turbo $135 Calipers, $160 to rebuild
    2001 Mini Cooper S Rotors, 276mm dia, 22mm thick, 64mm centre hole (same as AE86) DBA P.N. 542 RDA P.N. 7352S (slotted) $285 Pair
    Custom made bracket to fit Calipers to AE86 Hubs
    4x M12 x 30mm Cap Head Bolts
    8x M12 x 35mm Cap Head Bolts


    First, brake adapter bracket.

    Using CAD drawings from Twinky on Toymods , brackets are milled from solid steel on CNC. These were made cheaply by some guys at work, but with the drawings I think any fabrication shop could do it. Cad drawings are available

    Free Viewer/Printer for DWG and DWF >





    Second, modify Mini rotors



    The rotors have a chamfer on the inside where they locate on the hub, a new chamfer needs to be made on the opposite side to fit over the AE86 hub, this can be done on a lathe in a few minutes.





    Third, modify Sprinter hub



    Because the disk is so much larger, I replaced the standard M10 bolts that mount the disc on the hub with new High Tensile M12 items, to the holes on the hub were drilled out to 10.2mm, and re-tapped at M12. Then, using the AE86 hub, re-drill holes in rotors to mount onto reverse of hub, PCD is about 87mm but having the old rotors and hubs you have a template.






    Then, assemble the whole setup. Original AE86 brake lines can be used, or replacement braided units (ex. From AJPS $180) sweeten up the system. Original master cylinder can also be used, with a T-18 rear end my pedal felt a bit squishy at first, then firms up. Nissan Skyline R32 non-ABS is now installed and pedal feel is much firmer and stronger. Master bolts onto original booster and I bent original hard lines to suit. Had to shorten one hard line and re-flare but it wasn't difficult. Passed QLD Mod plate test with ease, stopping from 60km/h in 19m with Bridgestone RE001 195/50 Tyres.






    Clearance is good with 15’’ SSR wheels, about 1cm to the outside of the rim. There is a clearance issue with the spokes so I ran a 7mm spacer. Currently running Watanabe RS 15 x 8.5 -6 and running an 11mm custom spacer. Wheels without dish or wheels designed for more modern cars (Rota Grid 16x8 +10 for Example) fit without any spacers.


    Last edited by Oly AE86; 22nd January 2014 at 04:44 PM.

Similar Threads

  1. Replies: 4
    Last Post: 13th May 2012, 11:17 AM
  2. Brake Adaptors 294mm Rotor RX7 calliper
    By Rip it in forum Car Parts For Sale
    Replies: 29
    Last Post: 20th August 2009, 09:22 PM
  3. RX7 adapter for bigger rotor's (276mm) 15 Rim
    By dave2221 in forum Car Parts For Sale
    Replies: 5
    Last Post: 25th April 2009, 04:15 PM
  4. Mazda FC 4 Piston Calipers Brake Upgrade!
    By ta22max in forum Car Parts For Sale
    Replies: 4
    Last Post: 5th September 2008, 12:21 AM
  5. AJPS rx7 caliper/civic rotor plates
    By delazy in forum Car Parts For Sale
    Replies: 14
    Last Post: 24th August 2008, 10:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •