Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: auto 2 manual parts list?

  1. #1
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default auto 2 manual parts list?

    im converting a 81 xx ke70 corolla from auto to manual
    i think i got most of the parts lined up but can some one just list a parts list
    would be helpful

    cheers

  2. #2
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    K40 manual gearbox
    gearbox crossmember
    metal plate between gearbox and engine
    flywheel and bolts
    clutch
    clutch cable
    pedal box, or clutch pedal at least

    Stick will come through the hole, but it may need to be modifyed. Or parts overed over.

    May need tailshaft also.

  3. #3
    Senior Member squish_m8's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    SA
    Location
    Adelaide
    Country
    Australia
    Posts
    783

    Default

    or k50 gearbox

  4. #4
    Veteran Konakid's Avatar
    Join Date
    Dec 2008
    Name
    Henry
    State
    SA
    Location
    Eastern
    Country
    Australia
    Posts
    4,752

    Default

    Good post Doris, + reps.
    RT142 Estate.

    AJPS.

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Name
    Dan
    State
    Vic
    Location
    Western Subs
    Country
    Australia
    Posts
    405

    Default

    speedo cables are different auto to manual
    the tailshaft manual and auto will be different so you can either press out the piece you need (the coupling that joins the diff) or
    if your lucky like me and had a doner car steal it from that


    also you'll get stuck with the same thing as me where you'll need a cup where the clutch cable goes through im trying to work out a simple and good fix but haven't found anything as yet

    PM me if you have any questions - also the pedal box is a prick to pull out enjoy
    Last edited by hitoriko; 29th March 2009 at 08:58 AM.
    . h i t o r i k o .

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Name
    Nic
    State
    Victoria
    Location
    Mt Evelyn
    Country
    Australia
    Posts
    660

    Default

    how different are the trans tunnel from auto to manual? im doing a manual conversion on ae71. so wondering how different the hole is for the shifter?
    cheers
    nic

  7. #7
    Junior Member prodigy's Avatar
    Join Date
    Aug 2010
    Name
    Lalla
    State
    Western Cape
    Location
    Athlone
    Country
    South Africa
    Posts
    9

    Default

    Hi there, sorry for this super late reply...lol

    I too am switching from auto to manual, having trouble mounting the manual gearbox? I see you mentioned gearbox cross member?
    Where is that situated, im new to this...
    Spreading an idea through radiant osmosis....

    ex '98 FIAT Uno Turbo 176kW/362nm@ 1.2bar+Meth

  8. #8
    Veteran
    Join Date
    Dec 2008
    Name
    Rob
    State
    Victoria
    Location
    Moorabbin
    Country
    Australia
    Posts
    4,255

    Default

    About the speedo cable.
    How is it different? Know the best cable to use when converting ke auto to t50?
    Cheers

  9. #9
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default

    auto-manual cable is different where it screws into the gearbox. or its too short can't remember, probley both

    manual k50 speedos fit t50s im pretty sure. not sure how ratios go.

    gearbox crossmember is the bit that holds the gearbox up. it bolts to a rubber mount on the gearbox towards the back.
    you may be able to use an auto one. i remember fileing out my crossmember to suit.

  10. #10
    Senior Member
    Join Date
    May 2010
    Name
    Chris
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    105

    Default

    I have a feeling the auto tunnel is wider in the KE70's then the manual>?

Page 1 of 2 1 2 LastLast

Similar Threads

  1. [WA] AE86 stock parts cleanout - Too many parts to list
    By upgarage in forum Car Parts For Sale
    Replies: 11
    Last Post: 8th July 2011, 01:39 AM
  2. Auto to Manual
    By Corona w/ Lemon in forum Technical - Questions
    Replies: 7
    Last Post: 19th June 2010, 01:25 PM
  3. Auto to manual
    By damo46 in forum Technical - Questions
    Replies: 2
    Last Post: 16th August 2008, 07:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •