Page 1 of 22 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 10 of 216

Thread: Kierans 4AGTE Poward 86 (Tassie spec)

  1. #1
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default Kierans 234kw 4AGTE Poward 86 BUILD COMPLETE!! (Tassie spec)

    Some people may remember my first build of this car a few years ago?






    My current build consists of the following:

    4AGTE
    AE92 smallport GZE
    quad throttles (silvertop)
    custom grind Kelford cam from NZ roughly 9.5mm lift 264 duration
    solid bucket conversion
    1mm over size valves
    HD valve springs
    match ported and smoothed casting marks
    ACL race bearings
    ACL steel ring set
    Cometic head gasket
    GT2871R turbo 0.64 rear housing

    W series gear box
    hilux diff

    front 8kg coil over sleeve kit, noltec camber tops (shocks not purchased)
    rear 6kg spring (shocks not purchased)
    294mm front rotors with RX7 FD calipers (custom bracket avalible to purchase)
    white line adjustable sway bars
    25mm bolt on spacer of front
    40mm RCA
    Corona LCA
    power steer knuckles
    6mm lock spacers
    Work Equip 03 15x9 -3



    CAMS approved roll cage
    fixed back seats
    trust nylon shift knob/ball
    D2 hydralic hand brake

    DMAX body kit
    TRD style? duck tail
    smoked crystal tail lights

    These are all the components I have collated so far fair bit more to do!

    Much Thanks and Praise to:

    john from Davidsons Autobody
    Matt from Tasmanian Engine reconditioning
    Aaron (and myself) from Azcustom Performance Fabrication
    Tobias from Koolstik Signs

    Here is a host of my current build photos of my ae86













    Last edited by klusio; 3rd June 2012 at 04:04 AM.

  2. #2
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default




















  3. #3
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default










  4. #4
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default

    looks sweet man, got a power figure???? good luk with it all mate


    joe
    stay classy

  5. #5
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    I am a little worried about your tyre fitment and rear tyre clearance. I'm sure you have it all sorted.

  6. #6
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default

    No power figures yet but we are expecting just over 200kw at the wheels? the photos above are how it currently sits the engine should hopefully be together next week still a lot of work to be done.

    Jonny the photo is of the car on cut bump stops so travel is limited however we do plan to try get another 6mm or so out.

  7. #7
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    only thing ill have going any time soon is the ksev, not that id be up the front of the pack time wise even if the 86 was done

  8. #8
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default

    Yeah Im keen as to get everyone one out to basky for some laps enjoyed the last lap/circuit day out there

  9. #9
    Veteran
    Join Date
    Dec 2008
    Name
    Aaron
    State
    TAS
    Location
    In the Mountains
    Country
    Australia
    Posts
    2,518

    Default

    finally getting something better then those ugly superlites again... good to see!

  10. #10
    Junior Member
    Join Date
    Apr 2009
    Posts
    17

    Default

    Love the wheels......... !

Page 1 of 22 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Similar Threads

  1. jap spec 86
    By Hally in forum Cars for Sale (Toyota Only)
    Replies: 8
    Last Post: 13th September 2008, 03:44 AM
  2. jap spec 86
    By Hally in forum Cars for Sale (Toyota Only)
    Replies: 3
    Last Post: 8th September 2008, 10:46 PM
  3. jap spec 86
    By Hally in forum Cars for Sale (Toyota Only)
    Replies: 1
    Last Post: 8th September 2008, 10:26 PM
  4. aus spec 86
    By djscheppy in forum AE86 Owners Forums
    Replies: 20
    Last Post: 18th March 2006, 12:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •