Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: lewwys ae86

  1. #1
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default lewwys ae86

    ive got a ADM sprinter 86. i bought it about 2 years ago now. when i got it, everything was standard and had a bit of rust. know it has no rust that i know of, and not much is standard

    engine:
    AE101 4A-GZE
    TRD copy extractors
    standard inter cooler made front mount
    oil cooler (not fitted yet)
    2.5 inch exhaust under diff with 3 inch tip, its very loud

    suspension:
    front coilovers with 7Kg/mm spring rate
    rear short stroke shokes
    rear spring with 5 spring rate
    front and rear whiteline sway bars (not fitted yet)
    cusco rear strut brace (not fitted yet)

    everything else:
    hilux diff with a 4.1 ratio
    R31 skyline rear disks and calipers on the diff
    slotted front disks
    sony explode head unit
    13 x 6.5 mags with close to 0 offest, think there globes
    luise steering wheel
    honda prelude front seats

    every mod took twice as long as it should have been, but im very happy with it. but at the monent its getting an engine rebuild because a few things broke at the last IDA drift day.

    heres some pics of it






    Last edited by ae86ln; 26th December 2008 at 01:22 PM.

  2. #2
    E-Famous (Remeber your roots)
    Join Date
    Dec 2008
    Name
    marvis
    State
    QLD
    Location
    Lower Brisbane
    Country
    Australia
    Posts
    7,814

    Default

    Looks like an alright setup.

    It's not always that high is it?

  3. #3
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    na the driftin shot is the most current, with the suspension. the others are before the suspension

  4. #4
    Senior Member ae86 drifter's Avatar
    Join Date
    Dec 2008
    Name
    Pete
    State
    NSW
    Location
    Other
    Country
    Australia
    Posts
    380

    Default

    looks like u have come a fair way lewwy,havent seen ya in ages

  5. #5
    Banned
    Join Date
    Dec 2008
    Posts
    790

    Default

    Is that the factory 84 558 Yellow?

  6. #6
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    yer i know its never on the road so i hardly drive it

  7. #7
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    wouldn't have a clue

  8. #8
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    gees i just relized it been a year since my last update. it took forever to rebuild it, things kept braking

    heres is some new parts
    pulley bros smaller supercharger, the clutch went in so i welded it fso its fixed know which manages 14psi boost all the time
    no intercooler just a small home made plenum
    all brake lines are know braided
    front sway is know fitted and its nice at stiff
    ems stinger computer
    and have 17 mags all with tyres in 13's and 1's with a set of full slicks for the 14's cant wait for a track day

    got it tuned last week made 121.7hp in third little disapointed but made 437.6N.M of torque at 3500rpm pretty happy with that. but with the intercooler itll be better cause the air temp was getting up to 100 degrees so we only tuned it to 5500rpm

    ill get pics up when i get my net back.

  9. #9
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    heres some new photos of it


    By , shot with at 2010-03-05


    By , shot with at 2010-03-05


    By , shot with at 2010-03-05


    By , shot with at 2010-03-05

    my mate said it took him forever to get the exhaust so close to the car and it full mandrel bent.

  10. #10
    Veteran 86TRD's Avatar
    Join Date
    May 2009
    Name
    Luke
    State
    NSW
    Location
    Forster
    Country
    Australia
    Posts
    2,280

    Default

    those pictures are massive , car looks good

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •