Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: anyone in melb done a duck tail installion before?

  1. #1
    Senior Member .ady's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    VIC
    Location
    Footscray
    Country
    Australia
    Posts
    693

    Default anyone in melb done a duck tail installion before?

    hey guys just wanted to know how many guys have done this themselves. or know of a place that does a really good job installing it. getting one on thursday and looking to chuck it on...looked at the other post but seems abit to hard for me...so any help helping me install it or someone who can install it wud b great! thxs in advance
    Quote Originally Posted by KE slider View Post
    yes i did fail she was 14 what u expect(shakes head)
    Quote Originally Posted by todd View Post
    why are u messaging a 14yo asking if u can 'tap that'?
    Quote Originally Posted by calknowles View Post
    cause hes like chaos in the size department.

  2. #2
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    ah pm rick, the guy sellin all the 86 parts in melb, i dunno whether he'd do another one but the car i'm buying off him has one moulded perfectly, i'm sure he might oblige if you show him cash

  3. #3
    Senior Member .ady's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    VIC
    Location
    Footscray
    Country
    Australia
    Posts
    693

    Default

    isnt he in bendigo? thats like 150km drive for me lmao
    Quote Originally Posted by KE slider View Post
    yes i did fail she was 14 what u expect(shakes head)
    Quote Originally Posted by todd View Post
    why are u messaging a 14yo asking if u can 'tap that'?
    Quote Originally Posted by calknowles View Post
    cause hes like chaos in the size department.

  4. #4
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    n ah man, his name is rgeogiou or somethin, have a look, he's in north i think, near thomastown

  5. #5
    Bad Email Address
    Join Date
    Apr 2009
    Posts
    46

    Default

    yeah done an fitment job that cam out sweet. Its not easy if you want a nice moulded finish. Took me ages.

    You need to make sure the wing you buy is in very good condition. it pays in the long run. Its very hard to get the ripples out of the top dish bt.

    Sikaflex it on with 2-3 self tappers to hold it tight.

    once the sikaflex dries, remove the screws. use fiber glass to fill up and holes and joins and the filler to finish.

    you gotta let it sit for ages or heat it up with a heat gun so you new fiberglass shrinks as much as it is going to. then body filler it and highfill it

    up to you how long you spend rubbing it back.
    Last edited by rgeorgiou; 2nd May 2009 at 09:51 PM.

  6. #6
    Bad Email Address
    Join Date
    Apr 2009
    Posts
    46

    Default



  7. #7
    Senior Member .ady's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    VIC
    Location
    Footscray
    Country
    Australia
    Posts
    693

    Default

    where abouts are you? suburb to be more specific
    Quote Originally Posted by KE slider View Post
    yes i did fail she was 14 what u expect(shakes head)
    Quote Originally Posted by todd View Post
    why are u messaging a 14yo asking if u can 'tap that'?
    Quote Originally Posted by calknowles View Post
    cause hes like chaos in the size department.

  8. #8
    Bad Email Address
    Join Date
    Apr 2009
    Posts
    46

    Default


    mill park

  9. #9
    Senior Member .ady's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    VIC
    Location
    Footscray
    Country
    Australia
    Posts
    693

    Default

    yea i remeber now....one of my mates bought an exhuast system from ya! think you can help with the wing for some moneys? hahah
    Quote Originally Posted by KE slider View Post
    yes i did fail she was 14 what u expect(shakes head)
    Quote Originally Posted by todd View Post
    why are u messaging a 14yo asking if u can 'tap that'?
    Quote Originally Posted by calknowles View Post
    cause hes like chaos in the size department.

  10. #10
    Bad Email Address
    Join Date
    Apr 2009
    Posts
    46

    Default

    its a prick of a job.... send me a pic of the wing. hows the condition?

    yeah the guys with all the parts. lol Your mate and he friend were funny cunts. lol hehehehe


Page 1 of 2 1 2 LastLast

Similar Threads

  1. Ae86 Duck Tail
    By wideslider in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 3rd March 2008, 04:57 PM
  2. duck tail wing
    By DriftPlease in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 23rd June 2007, 01:17 AM
  3. 86 duck tail/bob tail wing wtb
    By 131-sam in forum Cars or Parts Wanted
    Replies: 3
    Last Post: 19th February 2007, 06:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •