Results 1 to 9 of 9

Thread: lower control arm bolt, getin it back in

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Dec 2008
    Name
    Tom
    State
    SA
    Location
    Rostrevor
    Country
    Australia
    Posts
    46

    Default

    i cant seam to get the bolt back in as shown in tehse pictures, what is the easiest way to do this? car is corona rt142

    thx


  2. #2
    Senior Member
    Join Date
    Nov 2008
    Name
    Ryan
    State
    qld
    Location
    brisbane
    Country
    Aust.
    Posts
    616

    Default

    keep wriggling the lca around until it does (support the discs etc with a spring under it or something)

    also, and this might be different, but on a keto the bolt goes the other way, with the head on the side of the steering rack end, tried swapping it around?

    there is no easy way, and there is probably no alternative way either, so just keep wriggling the lca around

  3. #3
    gunbz-r
    Guest

    Default

    caster rods off and sway bar to let ya wiggle it easy

  4. #4

    Default

    Yes, remove the caster rod, swaybar and other junk. Wiggle the LCA while hitting the head of the bolt with a hammer. Boing in she goes.

    Hen

  5. #5
    Member
    Join Date
    Dec 2008
    Name
    Tom
    State
    SA
    Location
    Rostrevor
    Country
    Australia
    Posts
    46

    Default

    <div class='quotetop'>QUOTE (Hen is a total nutcase @ Nov 13 2007, 09:27 PM) </div>yea i was thinking about taking em off, how hard are they 2 put bak on?

  6. #6
    Veteran
    Join Date
    Dec 2008
    Name
    Dave
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    2,667

    Default

    castor rod is easy to put back on, sway bar is a little more fun, but its just a stock one by the look of it, so will be easy, just get a mate to bend it into place while you stick the bolt in :2thumbs:
    In faith there is enough light for those who want to believe and enough shadows to blind those who don't.
    - Blaise Pascal

  7. #7
    Member
    Join Date
    Dec 2008
    Name
    Tom
    State
    SA
    Location
    Rostrevor
    Country
    Australia
    Posts
    46

    Default

    <div class='quotetop'>QUOTE (ke70dave @ Nov 13 2007, 10:41 PM) </div>ah ok cheers mate, ill give it a go 2moro.

  8. #8
    Veteran johl's Avatar
    Join Date
    Dec 2008
    Name
    Johl
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    2,812

    Default

    even stock sway bars are a bitch. what i did was loosely bolted one side down which is easy just use as little thread as possible. then get ur mate to put a jack under it and wind it up so it lifts the side that u just bolted down and pushes the other side down. u'l just have to move it a little side to side to get it in the right spot. easy.
    stroked 2L ca18-ae86 in the build...eta xmas 2012?

  9. #9
    Senior Member
    Join Date
    Jan 2009
    Name
    Chris
    State
    QLD
    Location
    Coolangatta
    Country
    Australia
    Posts
    180

    Default

    I don't remember the swaybar being that much trouble. I left it loosely bolted on one side while I put the other in and then tightened them up. As Hen said, wiggle the LCA and tap the bolt with a hammer. It took a while to get one of mine back in.

Similar Threads

  1. Lower control arm identification
    By ke_70_blue in forum Technical - Questions
    Replies: 6
    Last Post: 13th November 2012, 06:41 PM
  2. Lower Control Arm- Measurments & Compatibility
    By hitoriko in forum Technical - Articles
    Replies: 117
    Last Post: 2nd July 2012, 02:36 PM
  3. Replies: 22
    Last Post: 25th August 2011, 03:15 PM
  4. WTD: lower control arm!
    By sprintrphile in forum Cars or Parts Wanted
    Replies: 4
    Last Post: 18th August 2009, 09:50 PM
  5. lower control arm problems.
    By Trucka 115 in forum Technical - Questions
    Replies: 2
    Last Post: 25th September 2007, 12:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •