Anyone?
Hi guys,
After a quick answer. What socket size to fit 4ag 16V sparkies?
I had a deep socket at home but the prick doesnt fit in the recess around the plug.
1984 JDM Zenki Trueno GT-Apex Hatch
4AGE 16V
+Quads, HKS 264 cams, Microtech LT10s, TRD gearset gearbox, TRD2WAY LSD, fun!
FOR SALE: JDM 4AG PACKAGE+ITEMS (ENGINE/GBOX/EXHAUST/ECU/SHIT)
http://www.ae86drivingclub.com.au/fo...ad.php?p=15205
Anyone?
1984 JDM Zenki Trueno GT-Apex Hatch
4AGE 16V
+Quads, HKS 264 cams, Microtech LT10s, TRD gearset gearbox, TRD2WAY LSD, fun!
FOR SALE: JDM 4AG PACKAGE+ITEMS (ENGINE/GBOX/EXHAUST/ECU/SHIT)
http://www.ae86drivingclub.com.au/fo...ad.php?p=15205
The spark plugs are 16mm.
I use a 16mm thin-walled impact driver on a ratchet handle.
Your plugs shouldnt be done up too tight anyways.
I use 16mm deep socket (maybe yours is too phat). It has a rubber grommet on the inside which grabs on the white part of the plug and pulls it up. Its a specialised piece.
wait wait... you mean... a spark plug socket?!?!
whoa
or you could use a 16mm deap socket and a magnet on stick
Yeah, this. The rubber fell out of mine. Long nose pliers to put them back in, too
You can have any brew you want... as long as it's a Datsun / Corolla / What is that?
If the deep socket doesnt fit, take it to a machinist (or at least someone who can use a lathe) and machine down the external diameter a few mm's from the open end up. Might only cost you a few beers.
Better yet, head to super cheap or an auto store of some description and buy a few cheap separate 16mm sockets and get a few done at once. If they have to machine quite a bit off the sockets can crack, so you'll have spares.
I use do this to the plug sockets for my RX7's, 13B's have a big ridge around the spark plug hole and 90% of spark plug sockets dont fit.
just grind it down on a bence grinder, free