Results 1 to 7 of 7

Thread: T3 smallport to bigport manifold adaptor - basically new

  1. #1
    Veteran Golberg's Avatar
    Join Date
    Dec 2008
    Name
    Lawrence
    State
    NSW
    Location
    Wollongong
    Country
    Australia
    Posts
    1,339

    Default T3 smallport to bigport manifold adaptor - basically new


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    I purchased last year a small port to big port manifold adaptor from T3. Its barely been used, was on the engine for no more than 50kms and still looks shiny and brand new. At the time it cost me $160 new, now all I am asking is for the same back. If you tried to get a new one now you'll find they are ALOT more expensive as the exchange rate has fallen hugely since I bought it.

    For those who don't know, these are used in order to run a RWD manifold on a small port in most instances. They can also be used to adapt any other manifold too.

    So it'll set you back $160 and I'll even throw in with that a set of big port manifold bolts, studs and nuts which you'll need to swap onto a small port motor to make it work.

    Photo:

    Note, that was taken when I first got it, but it still looks the same, its just got a bit of silicone on it which I am cleaning off now.

    Located in Wollongong NSW, but I am definitely willing to post.

  • #2
    Veteran Golberg's Avatar
    Join Date
    Dec 2008
    Name
    Lawrence
    State
    NSW
    Location
    Wollongong
    Country
    Australia
    Posts
    1,339

    Default

    I'll include postage to anywhere in Australia for the $160.

  • #3
    Veteran Golberg's Avatar
    Join Date
    Dec 2008
    Name
    Lawrence
    State
    NSW
    Location
    Wollongong
    Country
    Australia
    Posts
    1,339

    Default

    Alright, postage included for $150, can't go any less or I'll just keep it.

    Also just found the 2 Techno Toy Tuning transfers they sent with the adapter, I'll include them too.

  • #4
    Junior Member
    Join Date
    Apr 2009
    Name
    Ben
    State
    Victoria
    Location
    Warragul
    Country
    Australia
    Posts
    18

    Default

    Hi, is this still available??
    Please email hi-perform@hotmail.com
    Thx

  • #5
    Veteran Golberg's Avatar
    Join Date
    Dec 2008
    Name
    Lawrence
    State
    NSW
    Location
    Wollongong
    Country
    Australia
    Posts
    1,339

    Default

    Sure is, I've emailed you as requested.

  • #6
    Senior Member sun_moon's Avatar
    Join Date
    Feb 2009
    Posts
    971

    Default

    can it be flipped to run a smallport manifold on a bigport ?? (proberly a dumb question, but something i have always wondered)
    yo. i got fans across the country. Dongsoo Kim is who they feelin' , last time you had a fan, it was spinnin' from tha ceiling ! haha.

    Quote Originally Posted by rollin33 View Post
    Sun_moon that?s badass name. you?re a loser go watch the sunset with your boyfriend.


  • #7
    Veteran Golberg's Avatar
    Join Date
    Dec 2008
    Name
    Lawrence
    State
    NSW
    Location
    Wollongong
    Country
    Australia
    Posts
    1,339

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    No reason why it couldn't be.

  • Similar Threads

    1. Bigport to smallport adaptor - Wanted
      By Brooklandsbob in forum Cars or Parts Wanted
      Replies: 2
      Last Post: 13th April 2012, 05:21 PM
    2. WTB : t3 Adaptor Plate Smallport -> Bigport
      By djscheppy in forum Cars or Parts Wanted
      Replies: 3
      Last Post: 18th June 2009, 10:14 AM
    3. T3 velocity stacks & T3 bigport Itb's adaptor
      By lach in forum Cars or Parts Wanted
      Replies: 1
      Last Post: 22nd May 2009, 11:20 PM
    4. Replies: 20
      Last Post: 21st February 2009, 12:52 AM
    5. BNE: T3 4A Bigport to Smallport Adaptor Plate
      By PuGZoR in forum Car Parts For Sale
      Replies: 1
      Last Post: 24th June 2007, 07:57 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •