Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 30

Thread: Brake Adaptors 294mm Rotor RX7 calliper

  1. #1
    Senior Member Rip it's Avatar
    Join Date
    Dec 2008
    Name
    Jake
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    195

    Default Brake Adaptors 294mm Rotor RX7 calliper

    Hey All,

    What I have here for sale is some custom CNC'ed adaptor brackets to suit a massive 294mm Rotor. These have been machined for our needs and don't know of anyone else offering an adaptor to suit 86 struts and an RX7 calliper with such a large disc. The disc retains very similar offset to that of standard, and only requires new holes drilled to suit the 86 hub. I run 15x8 negative 4 offset on my AE71 and these clear my wheels. I have the part number of the required discs, you can get these in DBA series 4000 which I run on my set up.

    If the interest were there I can organise for another run of these to be done, minimum of 5 sets though.

    I currently have 2 sets of these on offer for $300 plus postage, located in Tasmania. Also if I were to do a re-run I couldn't be 100% sure of the price although would be similar.

    Any questions please ask.

    Jake

    Can see Photo's of the set up in Klusio's Build Thread:
    Last edited by Rip it; 22nd April 2009 at 10:51 PM.
    I got nothing.

  2. #2
    Senior Member 4.5AG's Avatar
    Join Date
    Dec 2008
    Name
    Vener
    State
    NT
    Location
    Lyons
    Country
    Australia
    Posts
    267

    Default

    Can you use both FD and FC calipers on this bracket?

  3. #3
    Senior Member Rip it's Avatar
    Join Date
    Dec 2008
    Name
    Jake
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    195

    Default

    Yes mate, you can.
    I got nothing.

  4. #4
    Member jy086's Avatar
    Join Date
    Dec 2008
    Name
    John
    State
    Victoria
    Location
    Nunawading
    Country
    Australia
    Posts
    97

    Default

    will 14inch wheels still fit?

  5. #5
    Veteran Dom86's Avatar
    Join Date
    Dec 2008
    Name
    Dom
    State
    WA
    Location
    Balga
    Country
    Australia
    Posts
    1,052

    Default

    i doubt it. 15's minimum.
    The Track Car Build: Indigo
    The Street Car Build: Street Build
    A Heap Of For Sale: The Heap

  6. #6
    Senior Member koulouris#03's Avatar
    Join Date
    Dec 2008
    Name
    John
    State
    Nsw
    Location
    EarlwoodNsw
    Country
    Au
    Posts
    167

    Default

    how does the disc mount with these adapteers in place??? i have a dodgy old setup on my car and the disc is only held in position by the calipers when the wheel is off the car.
    kiss ass like a bitch, so you can get ritch... but your boss gets ritcher of you!!!!

  7. #7
    Senior Member Rip it's Avatar
    Join Date
    Dec 2008
    Name
    Jake
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    195

    Default

    I haven't tried with 14's, but my 15's are close so I very much doubt it, in fact, I'd say no.
    I got nothing.

  8. #8
    Senior Member Rip it's Avatar
    Join Date
    Dec 2008
    Name
    Jake
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    195

    Default

    The adaptor picks up the original calliper mount holes on the strut and the disc mounts to the hub as per it does originally.

    Cheap big brake upgrade!!
    I got nothing.

  9. #9
    Senior Member 4.5AG's Avatar
    Join Date
    Dec 2008
    Name
    Vener
    State
    NT
    Location
    Lyons
    Country
    Australia
    Posts
    267

    Default

    Dba 42524 294 x 22?

  10. #10
    Senior Member Rip it's Avatar
    Join Date
    Dec 2008
    Name
    Jake
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    195

    Default

    Thickness is correct, 22mm.
    I got nothing.

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Front Brake Upgrade: RX7 4 Piston caliper and 276mm Rotor
    By Oly AE86 in forum Technical - Articles
    Replies: 22
    Last Post: 11th June 2014, 11:20 PM
  2. Ae86 front brake calliper mounting plates/brackets
    By brutus in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 25th September 2011, 07:38 PM
  3. Brake calliper piston sizes?
    By fergo308 in forum Technical - Questions
    Replies: 2
    Last Post: 22nd August 2011, 09:54 PM
  4. Replies: 6
    Last Post: 10th April 2011, 03:56 PM
  5. AJPS rx7 caliper/civic rotor plates
    By delazy in forum Car Parts For Sale
    Replies: 14
    Last Post: 24th August 2008, 10:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •