Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: Coilovers, 4A-GE, RWD Intake, EFI Setup, AE71 Rolling Shell + MORE

  1. #1
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    Selling all this because this was going to be a project car but due to other commitments and a lack of interest the decision has been made to sell up. So what we have here is a very large amount of what's needed to dump a 4A-GE into an AE71 and get it sliding So here we go...

    Location: VIC, SE Suburbs

    PLEASE NOTE: We would prefer to have this picked up rather than have to deliver stuff, so pickup does beat post if bidding the same prices. Sorry!

    ================================================== ========
    AE71 Rolling Shell

    -'84 AE71 Corolla CS-X
    -Red in colour
    -T50 Gearbox
    -4A-C with blown headgasket (great source for RWD parts for the conversion)
    -CS-X wheels
    -Interior stripped (good for drift car base )
    -Pretty much has all the conversion bits for a KE70 conversion - excellent source of parts for a project
    -Tacho dash, Remote fuel and boot release (CS-X luxury!)
    $SOLD



    ================================================== ========
    4A-GE Engine + Spare block + Lots of goodies

    -Bigport out of an MR-2
    -Inc. stock flywheel
    -Cam gear covers
    -Bigport ECU
    -Some strange heat-exchanger oil cooler
    -Spare stock fuel pump
    -Two coilpacks included
    -Two TVIS plates
    -Spare 4A-GE block
    -Complete and uncut engine loom (is actually the entire MR2 wiring loom)
    -Spare AFM
    -Note, spigot bearing will need to be installed before putting in RWD ($9 bearing at repco)
    $SOLD

    ================================================== ========
    Genuine RWD intake manifold

    -Not cut'n' shut - the good stuff!
    -Comes with spare throttlebody
    -Designed for bigport motor
    $SOLD



    ================================================== ========
    EFI Surge Tank setup

    -Complete under-car EFI surge tank setup
    -Surge tank, vl fuel pump and lift pump included with all appropriate hosing
    $SOLD



    ================================================== ========
    AE86 Coilovers + Custom springs pack + BRAKES

    -Ex-gilly (bonus? haha..) said they were Tein ones
    -No shock absorber inserts (got lost in auspost )
    -Front 8KG/mm springs
    -Freshly packed bearings by gilly and haven't actually used them since they were bought
    -With AE86 rotors/hubs and calipers
    -Rear 6KG/mm springs (Custom made sprinter ones)
    $800

    ================================================== ========
    Toyota Oldschool boss kit

    -Fits KE70/AE71 and 86 if they all fit the same boss kit..
    -Has toyota written on it.. omg!
    $SOLD

    Also have a bunch of tyres which can be taken away if you so desire - great for skiddies

    If you want to contact me, send a PM or call me on 0403 806 966 (preferably after 7pm on weeknights). SMS during the day on weekdays if you like.

    ---dens

  2. #2
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    Just remembered I had a few pics of the 71.



    ---dens

  3. #3
    Senior Member eightsixboy's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    VIC
    Location
    East
    Country
    Australia
    Posts
    218

    Default

    any pics of surge tank setup?

    Cheers

  4. #4
    Veteran
    Join Date
    Nov 2008
    Name
    David
    State
    QLD
    Location
    Ferny Grove
    Country
    Australia
    Posts
    3,670

    Default

    shame you guys never got it done, i'd forgotten all about it!!

    those shocks never showed up some auspost driver now has a fullset of Excel G's for an 86

    coilovers are stock 86 struts with what looks to be a tein coilover kit or at least Tein collars

  5. #5
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    Thanks for that gilly

    Will try and search for some pics of the surge tank setup asap for you eightsixboy.

    ---dens

  6. #6
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    w00t! Pics of the RWD Mani and the surge tank setup. Was purchased from TUF_086 about 6 months ago.



    ---dens

  7. #7
    Senior Member eightsixboy's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    VIC
    Location
    East
    Country
    Australia
    Posts
    218

    Default

    thnx for pic.

    Just looking at it there's the lift pump line to surge tank, a main hose to vl pump but what are the other two fuel lines for?

  8. #8
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    Return line and line to charcoal canister? Not to sure as it hasn't been used since purchase.

    ---dens

  9. #9
    Senior Member eightsixboy's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    VIC
    Location
    East
    Country
    Australia
    Posts
    218

    Default

    ok cool, were bouts u located? i'm in vermont, would like to have a look if possible?

  10. #10
    Oldschool Member
    Join Date
    Mar 2007
    Name
    C
    State
    Victoria
    Location
    South East
    Country
    Australia
    Posts
    41

    Default

    Check ya pm's!

    ---dens

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. ae86 rolling shell, silvertop 20v rwd setup running and tuned
    By mulligan in forum Car Parts For Sale
    Replies: 2
    Last Post: 21st November 2010, 09:20 PM
  2. RWD JDM 4A-GE Intake Manifold (SA)
    By ADM_86 in forum Car Parts For Sale
    Replies: 2
    Last Post: 12th March 2010, 09:11 PM
  3. Bigort 4a-ge Intake Gasket
    By KonaKid in forum Technical - Questions
    Replies: 13
    Last Post: 31st October 2007, 12:15 AM
  4. 4A-GE RWD
    By kaneO in forum Cars or Parts Wanted
    Replies: 8
    Last Post: 28th August 2007, 03:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •