Results 1 to 5 of 5

Thread: engine rebuild question

  1. #1
    Member SR_andy's Avatar
    Join Date
    Dec 2008
    Name
    Andrew
    State
    QLD
    Location
    Heritage park
    Country
    Australia
    Posts
    63

    Default engine rebuild question

    ok so i have a 4age small port i am about to rebuild

    question is can anyone see any problems with what my plans are.

    small port 4age ( already have)
    ae101 quads ( already have)
    288, 8.5mm lift toda cams ( need to purchase)
    cam gears (already have)
    valve springs ( need to purchase)
    0.5 mm head gasket (need to purchase)
    extractors (already have)

    then just a basically rebuild the engine with new bearing, vrs kit, head studs and rod bolts.

    can anyone see any problems with the build at all.

    any input would be great

  2. #2
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    some local grind cams might do the exact same thing but cost you a heap less. Stock valve springs might be fine, I dont know
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #3
    Senior Member lo_rolla's Avatar
    Join Date
    Dec 2008
    Name
    Damien
    State
    QLD
    Location
    Brissie
    Country
    Australia
    Posts
    681

    Default

    Nothing wrong with that.

    Are you gonna wash all the parts and machine the deck of the block and head and linish crank?
    My AE86 race, street, drift build.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=4156
    With Super Thanks to AJPS for all your AE86 and BBQ needs.

  4. #4
    Senior Member trueno85's Avatar
    Join Date
    Dec 2008
    Name
    Ayden
    State
    NSW
    Location
    Silverwater
    Country
    Australia
    Posts
    416

    Default

    yeah camtech sell good cams for 600 brand new, worth looking into if you dont mind it not being jap

  5. #5
    Member SR_andy's Avatar
    Join Date
    Dec 2008
    Name
    Andrew
    State
    QLD
    Location
    Heritage park
    Country
    Australia
    Posts
    63

    Default

    camtech ey. might be worth looking into. the bugdet just blew out a bit as a truck cleaned up my sprinter and i am waiting to see how much the pay out figure is.

Similar Threads

  1. 4AGZE Engine Rebuild
    By LiTTLe_DRaGoN_HuNTeR in forum Technical - Questions
    Replies: 2
    Last Post: 8th March 2008, 03:53 PM
  2. Engine rebuild
    By unit101 in forum Technical - Questions
    Replies: 4
    Last Post: 24th April 2007, 06:28 PM
  3. engine rebuild
    By psi_72 in forum Technical - Questions
    Replies: 5
    Last Post: 21st September 2006, 07:44 PM
  4. Cost of engine rebuild?
    By Skin in forum Technical - Questions
    Replies: 20
    Last Post: 25th March 2006, 04:20 PM
  5. Engine Rebuild
    By Shahzan in forum Technical - Questions
    Replies: 17
    Last Post: 4th December 2005, 12:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •