Page 1 of 13 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 10 of 127

Thread: Grant's b/t 7age

  1. #1
    Senior Member grantobius's Avatar
    Join Date
    Dec 2008
    Name
    grantobius
    State
    nsw
    Location
    newy
    Country
    aus
    Posts
    139

    Default Grant's b/t 7age

    g'day, l decided to make a new post about my car.This car is the first car ive ever owned, purchased it for $2000 at the age of 15. over the last couple of years it has had the basic shit done to it like suspsnsion etc.

    l done a b/t 20v conversion at the start of the year with front mount dizzy etc. l had it running for a hole 2 weeks b4 l got bottom end knock. l believe there is no point rebuilding something if your not goin to make it better. so l sold my old block,crank and fly and purchased 7a block and crank. here are specs and pics

    engine(in the build)
    b/t head cleaned up and new seals
    b/t cams
    b/t pistons
    b/t oil pump
    b/t quads
    t3 stacks
    forged rods
    7a crank polished
    7a block machine down 0.025''
    adaptronic ecu with seperate coils
    acl race bearings
    all new gaskets seals
    trd copies extractors with custom made zorst

    drivetrain
    t series drum with cusco 2way
    t-50
    excedy clutch

    Suspension:
    trd front and rear springs
    Kyb sr special shox
    whiteline panhard rod
    nag auto castor rods
    cusco rod brace
    cusco rca's
    tein camber tops

    inside/bracing
    cusco saftey 21 5 point cage
    bride brix
    momo steering wheel
    battery behind passenger
    autometer gauges
    cusco carbon front and rear strut braces

    The past










    7age time?









    l wanna have it back on the road ready for a tune in 3 weeks
    Last edited by grantobius; 26th April 2009 at 10:01 PM.

  2. #2
    Veteran NIZLAH's Avatar
    Join Date
    Dec 2008
    Name
    Niz
    State
    QLD
    Location
    South~Slide Briz
    Country
    Australia
    Posts
    1,077

    Default

    Fuck yeah nice man, I wanna hear how it goes.... keep us all updated..
    ------------------>>>Need something welded locally??? Hit me up, I may just be able to help<<<------------------

    BENT MECHANIX - Garage 20:

  3. #3
    Senior Member grantobius's Avatar
    Join Date
    Dec 2008
    Name
    grantobius
    State
    nsw
    Location
    newy
    Country
    aus
    Posts
    139

    Default

    yer l will, there is fuk all power figures on the neat bout b/t 7ages

  4. #4
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    werd...definately keen to see how this goes...my bottom end is nearly ready to be machined/assembled car its going in is still quite awhile off tho lol

  5. #5
    Senior Member lo_rolla's Avatar
    Join Date
    Dec 2008
    Name
    Damien
    State
    QLD
    Location
    Brissie
    Country
    Australia
    Posts
    681

    Default

    Nice engine build man.
    Love the look of the carbon brace man, looks tits.
    My AE86 race, street, drift build.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=4156
    With Super Thanks to AJPS for all your AE86 and BBQ needs.

  6. #6
    Senior Member grantobius's Avatar
    Join Date
    Dec 2008
    Name
    grantobius
    State
    nsw
    Location
    newy
    Country
    aus
    Posts
    139

    Default 7age

    its all comin together this week, my gasket kit and piston rings finally showed up so now l can get my head done. also bought this oil cooler setup of yahoo last nite.




    and yes its a rx7 oil cooler

  7. #7
    Scammer, DO NOT BUY FROM ME!
    Join Date
    Dec 2008
    Posts
    776

    Default

    where did u get the dizzy relocation kit from??
    HAHAH I LOVE BOOST LOOSING!!
    [QUOTE]iv done my research and welding the suspension solid seems the be the way to go for sliding purposes[/QUOTE]

  8. #8
    Veteran
    Join Date
    Dec 2008
    Name
    john
    State
    nsw
    Location
    liverpool
    Country
    australia
    Posts
    1,164

    Default

    whats the dims on the rx7 oil cooler ? i saw one the other day a oem one and they are massive for a 4age ...

  9. #9
    Senior Member grantobius's Avatar
    Join Date
    Dec 2008
    Name
    grantobius
    State
    nsw
    Location
    newy
    Country
    aus
    Posts
    139

    Default

    l got dizzy kit from america, was 2nd hand on ebay. the guy who l bought it of got it from garage annex new which is about 1200 aud. l dunno dim's till l get it, a purple notch irish brought in ages ago was running a rx7 oil cooler. looked like it was turbo'd lol

  10. #10
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    bump...needs updates

Page 1 of 13 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Similar Threads

  1. Replies: 22
    Last Post: 5th March 2012, 10:33 AM
  2. Grant's AE86
    By Granto in forum AE86 Owners Forums
    Replies: 51
    Last Post: 5th August 2007, 03:46 PM
  3. Grant's AE71
    By ae86hachiroku in forum KE70 / AE71 Owners Forums
    Replies: 130
    Last Post: 12th May 2006, 07:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •