Results 1 to 4 of 4

Thread: engine problem

  1. #1
    Veteran evil86's Avatar
    Join Date
    Dec 2008
    Name
    Phuoc
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    1,137

    Default engine problem

    hey guys/girls, im having some problem with my 4age in my 86. the motor is a jdm 4age with jdm engine wiring and jdm dash wiring in a adm 86. the setup is running a s15 fuel pump.

    PROBLEM : engine hunts at 1000rpm - 2000rpm at idle and sometime revs just stay at 2000rpm and makes a slight poping noise. rev cuts out at 4000rpm.


    thanks for reading and hope you can help me

  2. #2
    Veteran Nikkojoe's Avatar
    Join Date
    Dec 2008
    Name
    Tom
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    2,260

    Default

    Problem 1: you have a Vac leak and/or incorrectly set tps.

    Problem 2: Your engine is running in limp mode, incorrectly set timing, or your fuel supply is weak. Make sure your s15 pump is not a low pressure pump. A vl external pump is a nice common high pressure pump.

    Problem 3: You already created a thread about this before, there is no reason to make multiple threads on the same topic....
    1983 AE86 ADM rust spec goodness track car build - end of the road
    1984 AE86 Silver ADM mk2 daily build - SOLD
    1984 AE86 ADM granny car daily now 4AGZE - SOLD
    1983 AE86 ADM Engine Conversion Slut - SOLD
    2002 IS200 6spd - new daily in progress
    1986 AE86 JDM GT-Apex Levin Notchback ready to roll......

  3. #3
    Veteran evil86's Avatar
    Join Date
    Dec 2008
    Name
    Phuoc
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    1,137

    Default

    thakns nikko. would running an vl external and adm cradle in a jdm tank surge?

  4. #4
    Veteran Nikkojoe's Avatar
    Join Date
    Dec 2008
    Name
    Tom
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    2,260

    Default

    It will still surge when the fuel gets very low, but not as much as a straight adm tank and cradle with external pump.

    You could get an ae82 4age cradle and pump and modify the pickup so it sits at the base of the tank.
    1983 AE86 ADM rust spec goodness track car build - end of the road
    1984 AE86 Silver ADM mk2 daily build - SOLD
    1984 AE86 ADM granny car daily now 4AGZE - SOLD
    1983 AE86 ADM Engine Conversion Slut - SOLD
    2002 IS200 6spd - new daily in progress
    1986 AE86 JDM GT-Apex Levin Notchback ready to roll......

Similar Threads

  1. Shuddering Engine Problem
    By pnda86 in forum Technical - Questions
    Replies: 1
    Last Post: 6th December 2010, 10:37 AM
  2. problem with engine light
    By stej in forum Technical - Questions
    Replies: 0
    Last Post: 27th February 2008, 09:58 PM
  3. Problem with brakes (spongy when engine running)
    By jase ek in forum Technical - Questions
    Replies: 16
    Last Post: 11th December 2007, 01:42 AM
  4. Engine problem...
    By DRFT - 86 in forum Technical - Questions
    Replies: 38
    Last Post: 21st June 2007, 10:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •