ae86 t50 bearing part numbers

[Patric]

I had these on a sheet of paper but lost it.
Does anyone have the t50 bearing part numbers? (toyota Part numbers. might source from japan)

[Jonny Rochester]

You are best to get the numbers off the actual bearing. These are not Toyota numbers, but numbers from the maker such as NSK or someone. There bearing standards, and the numbers should match regardless of brand. Take the old bearings to a bearing supplyer or industrial shop. This will be much cheaper than "genuine' parts which will be NSK or similar anyway.

[Patric]

Typically I would agree with you but some bearings are out of stock here in Australia.
So I may be able to get the lot at a reasonable price from toyota direct in Japan through contacts.

Need toyota part numbers.

Anyone?

<div class='quotetop'>QUOTE (Jonny Rochester @ Apr 7 2008, 06:39 PM) </div>

[us_ae86]

Rebuilding (synchro's/bearings) t-50 toyota transmission.

Part #'s :
04331-14030 - Trans gasket kit (includes output shaft & input shaft seals)

90365-30020 BEARING, x 1 - Front - Input shaft bearing
90361-06047 ROLLER x 12 - Input/Output shaft roller/bearing
90363-25017 BEARING, x 1 - Rear - output shaft bearing
90369-30027 BEARING x 1 - Center - output shaft bearing
33365-14011 KEY, SYNC x 3 - 1/2 synchro hub keys
33368-20012 RING, SYN x 2 - 1/2 synchro's
33367-14010 RING, SYN x 2 - 3/4 synchro's
90365-30015 BEARING, x 1 - count shaft center bearing
90365-20004 BEARING, x 1 - front countershaft bearing
90365-20001 BEARING, x 1 - rear countershaft bearing
33394-14010 KEY, 3&4 x 3 3/4 synchro hub keys
33366-14010 KEY, 5&R x 3 5/Rev synchro hub keys
33367-14010 RING, SYN x 1 - 5th gear sychro
33363-14012 SLEEVE, T x 1 - 1-2 shift collar/synchro hub
33364-14010 SLEEVE, T x 1 - 3-4 shift collar/synchro hub
90364-37002 BEARING, x 2 - 1st & 2nd gear brgs
90364-37004 BEARING, x 2 - reverse gear brgs
90364-27003 BEARING, x 1 - 5th gear brg



AND I CAN STILL GET THEM ALL.

[Todd]

Thanks us_ae86

<div class='quotetop'>QUOTE (us_ae86 @ Apr 7 2008, 07:52 PM) </div>

[driftism]

they can change from gearbox to gearbox.

i pulled a couple apart, and found that they had different bearings and some of the internal diameters of the gears were different.

managed to source them locally though without too much trouble. works out cheaper than buying from toyota as well.