Results 1 to 6 of 6

Thread: 86 people with tarago diffs

  1. #1

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    just wondering other people out there with tarago diffs etc have done with there cars

    mine lightly scrubs so I'm jus gonna cut it away at the top of the tunnel and raise it a bit for clearance etc

    anyone else had any worries etc

    when cars lowered, mines not real low and it scrubs pretty bad so jus wondering how other people have gone with it

  • #2
    Senior Member Anthony's Avatar
    Join Date
    Nov 2008
    Name
    Anthony
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    831

    Default


    Have done a few now and haven't really had that problem. How's the pinion angle on yours? Josh's car is probably the lowest so far, still runs factory geometry and yeah, no probs.

  • #3
    Veteran Nikkojoe's Avatar
    Join Date
    Dec 2008
    Name
    Tom
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    2,260

    Default

    My mate has one in his ke70. From what I can see, his car wont have that problem either.

    edit 1000th post woooooo
    1983 AE86 ADM rust spec goodness track car build - end of the road
    1984 AE86 Silver ADM mk2 daily build - SOLD
    1984 AE86 ADM granny car daily now 4AGZE - SOLD
    1983 AE86 ADM Engine Conversion Slut - SOLD
    2002 IS200 6spd - new daily in progress
    1986 AE86 JDM GT-Apex Levin Notchback ready to roll......

  • #4
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default

    Robbie rob rob robblett.

    Mine's been up in the car for a while now, under full suspension load, and although I haven't driven it, I can't see any place on it that is scrubbing... All clears pretty alright actually...

    Maybe there's a cat stuck between the diff and the chassis? It would be awfully inviting... Nice and snug, maybe even a bit warm after driving.
    The Phoenix; In the build since 10/06!
    :: 4A-GTE / GT2560R / W58 / TRD 2-Way / F Series Diff / Microtech LT10S / AJPS Supplied Suspension ::
    Where will it stop? Will it ever be finished? How will it go? Why am I not wearing any pants?

  • #5
    Veteran driftke70's Avatar
    Join Date
    Dec 2008
    Name
    Ryan
    State
    QLD
    Location
    Buderim
    Country
    Australia
    Posts
    5,497

    Default

    you have the bolts around the rong way in the middle section of your tshaft.
    wheelfriends.wordpress.com

  • #6

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    i got a thicker 1 piece tailshaft^^

    put a spacer on the gearbox so it clears now with ease and tailshaft isnt on such a dirty angle

    car is now done besides sanding back the guards

    may 9 qr here i come

    thanks for input people

  • Similar Threads

    1. Diffs for my 86
      By 84AE86 in forum Technical - Questions
      Replies: 6
      Last Post: 13th May 2009, 07:22 PM
    2. Replies: 3
      Last Post: 12th August 2007, 12:40 PM
    3. Axle for T series 86 diffs
      By FREESTYLER in forum Technical - Articles
      Replies: 30
      Last Post: 24th November 2005, 07:53 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •