Hey ppl, loosing intrest in my AE71 so thinking of moving it on. specs are as follows
1983 AE71
KE70 front
ADM T50 manual
4AGE 20v silvertop
440cc injectors
Razorback ecu wired up to suit with hand controller
chrome trumpets
sandblasted throttle bodys (look brand new!!!!)
2 1/4 steam pipe exhaust resonator and cannon
copy TRD manifold Heat wrapped
braided clutch line
2x 14x7 -10 SSR meshies
4x 14x7 +8 enki cross fevers
IAP braided oil cooler and relocator
Calibre oil temp, oil pressure, water temp gauges
Pivot tacho
T18 front bumper
T18 rear bumper - needs mounts adjusting little bit bent
Bride ergo drivers seat on AE86 rail
Bosch 044 fuel pump
Moco Moco jap steeringwheel (glows in dark)
push button start toggle switch acc
coilovers in the front on 86 struts
stock shocks and cut springs in the rear
also have coilovers for the rear but require custom mounts.
welded borgie
corona LCAs (i think.... the bigger ones i always get confused)
NRCAs
Problems:
usual rust spots
LHR guard requires repair after flaring the rear guards
currently ive put a 4ac back into the car, so requires an exhuast to be hooked up
the 20v is waiting on rings, bearings and valve stem seals. took it out to rebuild
has waterlines done bolts straight into RWD format
looking for the 5500 mark for everything ono
south brisbane. PM or 0403779887
currently runs with the 4ac in it.
or swaps for something running. i cbf building anything anymore.
Pics: