Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: Haltech With 4age Loom, Injectors, Custom Turbo Manifold, Custom cams, and heaps mo

  1. #1
    Junior Member
    Join Date
    Feb 2009
    Name
    dug
    State
    qld
    Location
    gold coast
    Country
    australia
    Posts
    16

    Default Haltech With 4age Loom, Injectors, Custom Turbo Manifold, Custom cams, and heaps mo

    Parts:
    1. haltech E6K with custom loom made by beerhead for 4agte has 3 bar mapsensor, haltech boost, solinoid is wired to run coils off of 4agze dizzy will include coil pack. everything you need to run is there. car made 300 hp with this

    2. 550cc rx7 injectors were cleaned an flowed before use used for 600km's.

    3. 4agte high mount manifold is modified ebay manifold very high highmount. T3 flange with external gate.

    4. 4age 283deg custom billet cams with 9mm lift cost $950 used for 2000km's powerband from 5000-8000.

    5. Acl race series main bearing std size and clevite 77 race series rod bearing also std size.

    6. Cut and shut Bigport RWD intake and tvis plate with butterflies removed.


    Condition:
    1. good condition loom is pretty much new is wired to match the injectors

    2. perfect just flowed been in sealed bag since removed

    3. good condition could do with polish that about it

    4. perfect look like new

    5 brand new in box

    6 good works well



    Price:
    1. $800

    2. $200

    3. $300

    4. $750

    5. $150

    6. $100

    all prices are O.N.O please feel free to make me and offer


    Location: Tamborine mountian QLD about 15 min from Oxenford

    Contact: pm me here would prefer call or txt on 0421653334 or 55450409

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Name
    Nic
    State
    Victoria
    Location
    Mt Evelyn
    Country
    Australia
    Posts
    660

    Default

    pics??

  3. #3
    Junior Member
    Join Date
    Feb 2009
    Name
    dug
    State
    qld
    Location
    gold coast
    Country
    australia
    Posts
    16

    Default

    pics of wat mate i will supply pics on request

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Nic
    State
    Victoria
    Location
    Mt Evelyn
    Country
    Australia
    Posts
    660

    Default

    manifold

  5. #5
    Junior Member
    Join Date
    Feb 2009
    Name
    dug
    State
    qld
    Location
    gold coast
    Country
    australia
    Posts
    16

    Default

    here ya go



  6. #6
    Senior Member
    Join Date
    Dec 2008
    Name
    Nic
    State
    Victoria
    Location
    Mt Evelyn
    Country
    Australia
    Posts
    660

    Default

    you didnt have any issues with the height of the turbo using this manifold did you? also whats the wall thickness of the stainless?

  7. #7
    Junior Member
    Join Date
    Feb 2009
    Name
    dug
    State
    qld
    Location
    gold coast
    Country
    australia
    Posts
    16

    Default

    it was definatly a little close but the turbo on the manifold is a t3t4 so it pretty big and i dunno about the thickness its a modded ebay one

  8. #8
    Member Jase86's Avatar
    Join Date
    Feb 2009
    Name
    Jason
    State
    Victoria
    Location
    Melb. S.E.
    Country
    Australia
    Posts
    67

    Default

    Would the injector plugs on the loom fit 4AGZE injectors? Sorry just not familiar with the rx7 injectors.
    "go forth young man, and if it has more..... pull fifth"

  9. #9
    Junior Member
    Join Date
    Feb 2009
    Name
    dug
    State
    qld
    Location
    gold coast
    Country
    australia
    Posts
    16

    Default

    na mate the plugs are different and i think the impedence on the injectors is different so might need a retune

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Name
    Nic
    State
    Victoria
    Location
    Mt Evelyn
    Country
    Australia
    Posts
    660

    Default

    would the ecu and loom work on my 4age smallport that i am building? it is using gze pistons and will be turbo?
    cheers nic

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. custom turbo manifold stuff, leftovers, plates piping GOLD COAST
    By FORDISGAY in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 19th May 2012, 05:11 PM
  2. [NSW] FS: AE86 Custom Turbo manifold and exhaust COMPLETE
    By Brent_R in forum Car Parts For Sale
    Replies: 2
    Last Post: 27th July 2011, 07:22 PM
  3. Custom Inlet Manifold - 4age 16v
    By 45KIDS in forum Car Parts For Sale
    Replies: 13
    Last Post: 15th April 2010, 08:37 PM
  4. turbo and custom exhaust for 4age
    By fatke in forum Car Parts For Sale
    Replies: 2
    Last Post: 13th May 2009, 11:11 PM
  5. Garrett custom T28 + Custom Intake manifold
    By LOWAE86 in forum Car Parts For Sale
    Replies: 4
    Last Post: 27th June 2007, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •