really wanting to see pics of this...
Up for sale is a Toyota Corolla KE30 3TC.
3TC has: -New waterpump
- New leads
- New sparkplugs
- New rocker cover gasket and a head gasket (I think)
- Complete flush out
- No emission controls
- 2" Hurricane Extractors (4 - 2 - 1) with a 2" straight pipe to a Highflow Mufler.
- No engine fan
- New welsh plugs
- Modified KE30 engine cross member, however can come with stock engine cross member aswell.
- Currently running a stock carby, but can add in a 36 / 38 DGV Weber (I think thats what it is) with adaptor kit for the stock manifold. Either that or I can through in 38MM Webers with twin Weber manfiold at an extra (negotiable). I might even have a twin Solex setup off a 2TB that can be run on this engine (again negotiable if it works out).
Sports a TA22 T-50 with modified gearbox crossmember. No modification has been made to the shifter point. May be able to include a T18 T50.
Pedal box has been modified for hydraulic clutch conversion.
Brand new KE30 Radiator with modified inlet and outlet for 3TC engine. Includes a thermo fan setup of a Daweoo (sp?) that works a treat, never seen it get hot.
Converted to electronic ignition.
Front struts are from a RA40. This gives a brake upgrade, however 14" rims must be used, at least anyway.
Can come with a set of 14" Cheviots, 14" Celica rims (RA40 stockies) or JDM mesh rims for a little extra (negotiable with pricing). All 6" wide I believe.
Standard rear diff, with spare stock diff axles.
Custom tailshaft (I believe it was shortened 20mm).
KYB rears, near new. Fronts are also near new Monroe GT's.
There is rust in the shell, nothing unusal for the age of the car. Main concern would be replacement of the front guards. Both bumpers are in great condition. Windows came tinted when I bought the car. Comes with a sports steering wheel and the stock original.
Pictures will be up in the next few days.
Car is located in SA.
Contact me either through this thread or via PM. Inspections welcomed. Any other queries (I may have forgotten something above :hmm
Looking at around the $2200 mark considering whats gone into this, however I am open to negotiations.
really wanting to see pics of this...
Uploading them as I type . . . soon as their done it will be for all to see. Won't be the greatest though as it will be night time pics. More detailed ones tomorrow available by request. Paint may looked crap on the roof and bonnet . . . its just the camera (weird)
Also forgot to mention it does come with standard struts, if by any chance someone wants to go back to 13" rims. And the engine might look a little messy, thanks to the emission crap off the stock carby.
Cheers Fusion
Forgot to mention, again, it can come with AE86 struts, without tops or brakes. Was plainning on running them with camber tops and JDM Vented, but never got to it.
would u separate webbers and manifold if so how much chears
3TC twin manifold around the $160 mark, Webers around the $350 mark, 16mm chrome ram tubes custom ordered $100. Or all together for $550 roughly. Webers were rebuilt 6 months ago and have had very little use since than.
Also have a single 3TC Weber manifold that you could have for $100ono.
If your not to far into the hills I may be able to deliver to :turned:
Cheers Fusion
Bump . . . if I need to I may be looking at parting this out and leaving it as a shell to be crushed!
If theres interest in parts let me know and I will take it into consideration.
Prices would be as follows roughly (nothing final here)
Cheviot Sonics x 4: $130
JDM Mesh x 4: $250 - $300
Engine: $500 (includes electronic ignition, 2" extractors etc)
Modified radiator + thermo fan $150
Custom tailshaft: $100
TRD Blues: $200
Boss kit + steering wheel: $80 - $100
Gearbox will most likely not be sold, but if I did . . . be around the $200 mark as it ain't easy to find these TA22 T50's
RA40 Struts $80
AE86 Struts (not complete (brakes mainly)) $140
Corona arms $50 (Don't know there price just guessing)
Cheers Fusion
PM sent man
Bump
Looking at lowering it to $1600 without TRD Blues or headunit. Will come with KYB non - adjustables instead if I head in this direction.
Cheers Fusion