Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: hks cam shafts for 4age 16v

  1. #1
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default hks cam shafts for 4age 16v

    have a pair of 264 deg hks cam shafts here come out of my 7a as im going bigger they have 8.1 and 8.35 mm lift are in great condition ill be crack testing them tmoz for piece of mind and ill give them a polish when they are at work with an acid bath so they will be as clean as a whistle

    price is 600 for the pair

    location is Sydney Sutherland shire

    contact through pm

    on a side note i can install them for you at an extra cost
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  2. #2
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    bump 400 i don't need these anymore lowest ill go come and get em
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  3. #3
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    faaark... tempted, how would they run in a stock bigport with stock ecu?

  4. #4
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    not well if you hit the limiter it will fry plugs a bit
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  5. #5
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    bump up
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  6. #6
    Veteran timbo's Avatar
    Join Date
    Aug 2009
    Name
    Tim?
    State
    QLD
    Location
    Wild West
    Country
    Australia
    Posts
    2,145

    Default

    Any cam timing spec sheets with these?

  7. #7
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    maby if you search google dude they are hks i bought these second hand but i dont have any
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  8. #8
    Junior Member
    Join Date
    Jun 2011
    Name
    Tim
    State
    VIC
    Location
    Ballarat
    Country
    Australia
    Posts
    5

    Default

    Sorry if these are dumb questions, new to 4AGEs. Would these suit an otherwise stock bigport with adjustable cam gears running stock ECU with a microtech piggyback?

  9. #9
    Veteran McLEVIN's Avatar
    Join Date
    Nov 2010
    Name
    Chris
    State
    SA
    Location
    Adelaide
    Country
    Australia
    Posts
    1,411

    Default

    Yeh mate they will. Same setup as what I'm running..
    MOPAR or no car!

  10. #10
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    yeah mate will be fine can post em if you want
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

Page 1 of 2 1 2 LastLast

Similar Threads

  1. HKS & TODA Cam Shafts
    By 44GTE in forum Just JDM Imports
    Replies: 11
    Last Post: 25th June 2013, 01:11 AM
  2. [NSW] HKS 288/304 Cam - 4AGE 16V
    By JDMWheels in forum Car Parts For Sale
    Replies: 8
    Last Post: 3rd January 2013, 12:05 PM
  3. Standard 4AGE 16v Cam shafts Melb dont care about condition
    By Maciek in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 24th August 2010, 09:27 PM
  4. 4AGE 16v HKS cam gears
    By beauc in forum Car Parts For Sale
    Replies: 9
    Last Post: 15th April 2010, 10:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •