wes at ttg for the mechanical side..... but i dont know who for paint
So here's the deal,
I have ~4k cash and the following parts
2x 86 rolling shells, (one currently running w/ 4ac)
2x complete silvertops inc ittb's, 1x stock wireloom
1x microtech mapped for silvertop
2x complete bigports one w blown head gasket, one seized i think.
1x jdm rwd intake
1x t50
trueno front panels and lights
So what i need to know is places i can go to to put all this stuff together and get 1 running registrable car out of it for the 4k I have to spend.
What i think will need done is as follows:
Spray painter: one of the shells painted white or black incl prep work
Panel Beater: either a dinted quater panel and slight front radiator support area repaired OR a hammered in firewall repaired (the latter due to a botched s/t conversion)
Mechanic: seals bearings etc replaced,
the engine i would like to have silvertop bottom with bigport head running either the ITTB's or jdm rwd inlet manifold.
Auto Elec: it would need to be wired up with either the microtech for the ITTB's or have a jdm wireloom installed for the rwd intake manifold.
I would try to tackle all of it myself but I'm working 12 hr shifts and would really like to see something happen instead of them sitting there collecting dirt.
So yeah any suggestions on reputable mechanics, painters, bodyshops or just general tips and info would be appreciated.
Tyrone.
Last edited by burcoty; 12th December 2011 at 04:14 PM.
wes at ttg for the mechanical side..... but i dont know who for paint
Ah could you please include a location and phone number
Cheers,
Tyrone
I can paint an 86 for you, when do you need it done?