Page 2 of 2 FirstFirst 1 2
Results 11 to 18 of 18

Thread: 20V Dizzy Relocation Kits:

  1. #11
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    This product was developed for the U.S market. While I know I will sell some here most will go off shore. I already have two people running prototypes and four others with final versions. I am putting all my attention to a batch of 20 right now.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  2. #12
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    This is where it's currently at:



    For the time being these are going to be $380 each
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #13
    Senior Member Dori_Dori's Avatar
    Join Date
    Dec 2008
    Name
    Andy
    State
    VIC
    Location
    Westside
    Country
    Australia
    Posts
    176

    Default

    Is that the final design kits?

  4. #14
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    yes, fourth version
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  5. #15
    Junior Member
    Join Date
    Jul 2012
    Name
    Michael
    State
    NSW
    Location
    North Lambton
    Country
    Australia
    Posts
    1

    Default

    Hi are you still doing this kit. I need one for a 20V. How do I get this..!

    Regards

    Mick

  6. #16
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    Hi Mick I have a few here and I have also finished my install guide. Here is the information I give to people:

    The main part of the kit includes the following:

    Main adapter, center section, fasteners and spacers. No modification is needed to the head or engine however it holds the cap too close to the exhaust wheel to clear the cam cover. Soon a shroud will be available to cover the open hole against the cam cover if used.

    This kit it is a distributor cap relocation kit. The cap and rotor button are moved to the front of the engine while the original distributor base along with the wiring is kept intact at the back. This means all wiring bar the spark plug leads are left in their original position. It is suggested that the distributor blanking cover product is used to block off the electronics of the base. The original spark plug leads can be used in reverse bar the longest lead. A custom lead is for sale that looks like the OEM leads and costs $30. Also of note on the cap leads 2 and 3 need to be swapped positions as the cap is being rotated in the opposite direction. A single drop of Loctite or any other low grade retaining compound is needed to put this kit together.

    Video instructions are available and this product comes with a warranty.

    Price is $380 AUD, or about $388 USD

    contact me on or 0421 010 890
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  7. #17
    Member Davecb80's Avatar
    Join Date
    Nov 2011
    Name
    David
    State
    Victoria
    Location
    wodonga
    Country
    Australia
    Posts
    37

    Default

    Hi Sam,
    I am after a dizzy relocation kit for my black top 20v. Do you have any in stock ? Can you give me a price including postage to 3690 VIC ?
    How can I pay you ? paypal, over the phone, direct debit ?

    Thanks, Dave.

  8. #18
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I have them in stock as well as dizzy blanking covers adn longer leads.

    Payment is either from direct debit or through my merchant account with westpac that uses Visa or Mastercard. I will send you a PM.

    Also please have a read of the info on this kit here:

    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. t3 20v water relocation kit
    By s13 james in forum Technical - Questions
    Replies: 4
    Last Post: 21st May 2012, 10:01 AM
  2. 4AGE 20v Blacktop - Water relocation parts
    By s3phro in forum Technical - Questions
    Replies: 4
    Last Post: 7th March 2011, 09:59 PM
  3. 4ag20v Dizzy relocation + coil packs Kit
    By 20vMK1 in forum Technical - Questions
    Replies: 1
    Last Post: 13th July 2010, 07:21 PM
  4. EOI 20v Dizzy Relocation kit (VERY RARE)
    By ke25 racer in forum Car Parts For Sale
    Replies: 1
    Last Post: 9th August 2008, 10:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •