2AZ powered 86

[stahlz_ae86]

Good choice, I've done a couple pairs of caliper brackets for mine and my brothers cars. We use a Citroen Xantia disc (283mm x 22mm) with the FC calipers. I've had a quote to get a batch of the brackets made up and offer them as a group buy but the quotes were a bit high, so I'll be handing the drawings on to a mate when he's back from o/s to see if he can get a better price

My brothers sprinter is also running the same setup just with excel G instead of the koni and he's pretty happy with the handling.

[LittleRedSpirit]

Im very keen to see this setup. Particularly how it goes with the fc and spoke clearance. If its only a few mm it would be an ideal setup. Its exactly the size rotor Id be happy with. I assume its vented. I also think you will have more spoke area caliper clearance just by using ra40 bits. Its a slight bit different to ae86.

[stahlz_ae86]

Pete is running 15x7 +12 superlites and for me to run 15x7 +0 rewinds I will need a 2mm slip on spacer. The rotors are rda7103s I think, slotted and vented. Discs need to be bored out to 73mm and re-drilled to suit the Celica hub. What wheels were you planning to run on this rig?