Sunshine Coast Area - Anyone handy with rust removal and welding up holes?

[JDMBenji]

Hey folks,

I'm building up my 86 at the moment and I have come across a nasty rust hole. I was wondering if anyone is good at fixing rust? I'm reluctant to use bog =/ which is the easy way out.

If anyone can help me out I'm in the maroochydore area over the weekend.

Contact on 0406 0000 96

Thanks,
Ben =)

[biggo]

Depends where the hole is.

[JDMBenji]

the hole is at the bottom of the strut tower where it meets the chassis rail it's about 20mm by 60mm approx, seems like fuel has rotted the metal away.

[biggo]

if i can find some sheet metal ill do it for a carton

[JDMBenji]

Sounds good biggo, how thick is too thick for the metal I have access to 3mm plate at work? The car is on stands to so it isn't really driveable is that a problem?

[biggo]

I use 1.2 zinc coated sheet for rust repairs. 3mm is far to heavy for it to mate well, cut, fit. I thought i had some sheet but i cant find it.

Car on stands is not biggie, im in yandina.