Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: [SA][EOI] ADM AE86, 4AGZE, Tomei 2way, RX7 4 pots, Half Cage etc...

  1. #1
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Cool [SA][EOI] ADM AE86, 4AGZE, Tomei 2way, RX7 4 pots, Half Cage etc...

    Heya Guys,

    I'm looking at selling my project at the moment to buy a house, I'll put up some pictures onces this rain stops.. But for now the parts list is as below..

    Engine:
    Bigport 4AGZE (Done about 80,000kms)
    Nevo 175mm Pulley
    4-1 Extractors
    2.5" Exhaust

    Suspension/Brakes:
    Spax rear adjustable struts
    Unknown front struts (Havn't pulled it apart to check yet)
    8/6kg front/rear springs
    RX7 4 pots, rebuilt with RDA slotted rotors. (Not on yet but will be for the sale/test drives etc)
    S13/S15 rear slotted RDA rotors on JDM T series calipers (Not on yet but will be for the sale/test drives etc)

    Driveline:
    ADM T50 pretty tight still
    Exedy Organic Clutch (Only done 400kms if that)
    JDM T Series LSD rear end with Tomei 2 way LSD

    Wheels:
    Simmons wheels front and back, rears are 15x8 and the fronts are 15x7.5 (I'll need to confirm this again, havn't looked for a while)

    Interior:
    The rear interior has been stripped and replaced with a bolt in half cage, uncracked front dash etc (Pics will do it better justice)

    Description:

    The car has been my project for close to 2 years and so far I havn't had a chance to take it to the track! I'd like to keep it but I'm looking at building a house and I could use every penny I can get since I don't drive the car anymore.

    The body is very straight, there is minor surface rust in both arches and a small ammount of rust in the spare wheel well which will be repaired prior to sale.

    Price - $7500 ONO I'm looking for a quick sale here guys so I'm open to offers

    AGAIN, pics will be uploaded tonight once I this rain buggers off

  2. #2
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    And finally.. PICS!





  3. #3
    Junior Member
    Join Date
    Jul 2011
    Name
    brandon
    State
    sa
    Location
    western
    Country
    Australia
    Posts
    1

    Default

    Hey can you message me on 0406866700

  4. #4
    Junior Member
    Join Date
    Jul 2011
    Name
    brandon
    State
    sa
    Location
    western
    Country
    Australia
    Posts
    1

    Default

    Yo can you Message my number agai, didn't save Your number aha

  5. #5
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    Posting up pics of the engine bay and interior tonight for anyone that's curious

  6. #6
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    Excuse the shit quality....









  7. #7
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    Still for sale guys, going up on carpoint this week if no one's keen

  8. #8
    Junior Member antstar's Avatar
    Join Date
    Mar 2012
    Name
    Anthony
    State
    Victoria
    Location
    Melbourne
    Country
    Australia
    Posts
    3

    Default

    Has this been engineered?

  9. #9
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    It most certainly has not, there isn't much point because if you were to get defected the half cage, exhaust etc is what they'll ping you for if it's not the engine.

    Essentially I was building this as a track car, not a street car but yes it can still be regoed but as with any modified car, if you upset SAPOL they'll probably bend you over

  10. #10
    Senior Member
    Join Date
    Jun 2010
    Name
    Will
    State
    SA
    Location
    Nairne
    Country
    Australia
    Posts
    142

    Default

    Just so it's clear guys.. I'm not gonna accept law ball offers, if you havn't got close to 7k to spend then there's no point sending me a message offering 4k. I'm not fussed if it doesn't sell, and I'm not interested in dealing with you if your just going to chuck law balls at me

    Note: this is only aimed at the law ballers, eg the dudes flicking through 4k offers. 90% of the people i've dealt with have been fine

    Cheers,

    Will.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. [SA] ADM AE86, 4AGZE, Tomei 2way, RX7 4 pots, Half Cage etc...
    By s3phro in forum Cars for Sale (Toyota Only)
    Replies: 6
    Last Post: 23rd May 2012, 06:37 PM
  2. AE86 / KE70 (sedan) Roll Cage - 7pt, half or full cage
    By Bomfunkmc in forum Car Parts For Sale
    Replies: 11
    Last Post: 17th April 2012, 12:27 AM
  3. ke70 half cage. SA
    By NathanKe70 in forum Cars or Parts Wanted
    Replies: 4
    Last Post: 6th July 2009, 12:21 AM
  4. ae86 Bris- 4agze, Full cage, Full coilovers, 2way $8000
    By Rob574 in forum Cars for Sale (Toyota Only)
    Replies: 11
    Last Post: 11th April 2009, 02:21 PM
  5. HALF CAGE F/S SA
    By Touge205 in forum Car Parts For Sale
    Replies: 2
    Last Post: 10th June 2008, 08:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •