Zenki T series Axle (as on a celica, same size tho)
Kouki T series Axle (ae86)
more info on here
someone had a picture of zenki axle measurement and kouki ones next to eachother with some sort of measurements, can you post that up again cant find it in search section.
Last edited by Golberg; 9th June 2009 at 09:09 PM.
Zenki T series Axle (as on a celica, same size tho)
Kouki T series Axle (ae86)
more info on here
30kw club
thanks, these pictures will help many people in future, should be stickied somewhere.
I agree, I'll move it to tech articles section because this gets asked all the time.
Edited title also - so that its even more clear
Last edited by Golberg; 9th June 2009 at 09:09 PM.
Can we get some more measurements in this thread? i'll put a question thread up in a sec
8mm length difference between LSD & Non-LSD axles. Non-LSD are 8mm longer.
So if you've got an OEM lsd, but non-lsd axles you cut 8mm off the ends (splines are plenty long enough) and bevel/taper the end so it will insert easily.
I found this out a little while back when I had the opportunity with both available to me.
Andrew
Last edited by assassin10000; 26th July 2010 at 02:51 PM. Reason: Added measuerments.
I'm mainly after the length of the Spline'd section.
t18 t series: zenki right??
Launceston = Home of the surprise sodomist!!
so wat you guys are sayin is if i welded up my zenki diff i can put kouki axles in if i take 8mm off them?
Can you see the pictures above?
They differ in O.D by over a mm, so the answer is no they arent interchangable at all