[VIC] KE70 / 4AGE Conversion Parts some really good & random stuff!
People parting out my project as its going to cost $6k to finish it the way I want and I don't have the time or money to finish it properly so its not getting finished at all. Plenty of goodies available will be posting up more. Willing to post smaller items contact me for prices. Open to offers but be realistic.
Pick up is from the S.E. Suburbs you can PM, SMS or Call 0459 49 39 00
Ok so here we go!
Whiteline 24mm Adjustable front swaybar. Comes with all mounting hardware to suit KE70/AE71, castor rod mounts as you need to cut the stock ones to fit the ends through, Castor rods with new super pro bushes. This has all only been fitted to my rolling shell so is a little dirty but has never been driven on.
$180
TRD Number Plate Bolts
$5
Adaptronic E420D Basic ECU with 2.0M Loom vacuum line and USB cable still under warranty manual is all pdf off the adaptronic site, 4 Individual COP with connectors, Small port Dizzy with alloy cover to work as CAS by using the 4 pin out's to fire each coil. The top part of the dizzy where the rotor button goes on just needs to be cut down a little to fit the cap. Cost me $1400 for ecu and loom, $172.50 for COP's, $120 for dizzy plus more for the alloy cover.
This ECU is much better than the 420C with built in 4 Bar map sensor, Launch control and varying levels of boost with dual fuel maps.
$1100
