You have PM.
People parting out my project as its going to cost $6k to finish it the way I want and I don't have the time or money to finish it properly so its not getting finished at all. Plenty of goodies available will be posting up more. Willing to post smaller items contact me for prices. Open to offers but be realistic.
Pick up is from the S.E. Suburbs you can PM, SMS or Call 0459 49 39 00
Ok so here we go!
Whiteline 24mm Adjustable front swaybar. Comes with all mounting hardware to suit KE70/AE71, castor rod mounts as you need to cut the stock ones to fit the ends through, Castor rods with new super pro bushes. This has all only been fitted to my rolling shell so is a little dirty but has never been driven on.
$180
TRD Number Plate Bolts
$5
Adaptronic E420D Basic ECU with 2.0M Loom vacuum line and USB cable still under warranty manual is all pdf off the adaptronic site, 4 Individual COP with connectors, Small port Dizzy with alloy cover to work as CAS by using the 4 pin out's to fire each coil. The top part of the dizzy where the rotor button goes on just needs to be cut down a little to fit the cap. Cost me $1400 for ecu and loom, $172.50 for COP's, $120 for dizzy plus more for the alloy cover.
This ECU is much better than the 420C with built in 4 Bar map sensor, Launch control and varying levels of boost with dual fuel maps.
$1100
Last edited by Bluterus; 29th October 2012 at 11:06 AM.
You have PM.
Hey how much for the hood pins posted to 5115 Adelaide
Pretty Sure it will fit in a standard envelope so will just nick stamps from work so freeeee
Sweet, pm ur details an ill chuck 10 in ur account now, ill send u my adress
Will take those number plate bolts
When you wanna grab em Chris?
All done, would ya do 20 for the catch can posted?
BUMP!!
New Goodies added! Get your AE/KE making some REAL power!
I'll take that twinky wheel if it's not already sold. Can pick up this weekend sometime most likely.