Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: First testing of turbo kit in AUS

  1. #1
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default First testing of turbo kit in AUS



    Full write up here guys...

    Last edited by slide86; 17th August 2012 at 07:11 PM.

  2. #2
    Veteran Rice86's Avatar
    Join Date
    Jan 2009
    Name
    Richard
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    1,853

    Default

    that is sick
    dose

  3. #3
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    Nice bit of kit hey... I was set on the bullet supercharger, now I'm not so sure.

  4. #4
    Senior Member ach_66's Avatar
    Join Date
    Oct 2009
    Name
    Azz
    State
    NSW
    Location
    Newcastle
    Country
    Australia
    Posts
    128

    Default

    Only 5 to 8 psi too! Still recon the SC will press that much no worries minus the lag (even if minimal)

  5. #5
    Senior Member
    Join Date
    Dec 2011
    Name
    Kerry
    State
    SA
    Location
    Warradale
    Country
    Australia
    Posts
    200

    Default

    thats a hell of alot of pigeon! hahaha...

    good to see that it should be able to make some good numbers on a relatively stock motor...i still would love to know just how strong the motor is!

  6. #6
    Senior Member
    Join Date
    Feb 2009
    Name
    Steve
    State
    NSW
    Location
    Other
    Country
    Australia
    Posts
    391

    Default

    211rwkw at 8psi with 12.5cr, it wont last long

    163rwkw at 5psi on 98 should be ok.

    Interesting to see the Haltech doesnt control the Direct Injection yet

  7. #7
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    Why wont it last long???

  8. #8
    Senior Member hachirusto's Avatar
    Join Date
    Dec 2008
    Name
    Jay
    State
    VIC
    Location
    Melbourne
    Country
    Australia
    Posts
    695

    Default

    it will be interesting to see how long the standard motor will last at certain PSI points, The boys at castle hill have done a good job with this kit, looks awesome and stealth as.

    I think there is going to be alot of debate over turbo VS Supercharging these motors in the next couple of months, ive got my hands on SC for a much better daily driver with power on demand and usable power right through the rev range using a PD blower and not a centrifugal blower like the HKS kit
    Rust is a way of life

  9. #9
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    Seems like a good conversion...

    but I still have my concerns about a forces induction engine with a 12.5:1 compression...

    I mean that's higher than most built n/a motors ae86 fiends are running...

    Obvious being a modern engine with sequential injection certainly helps...

  10. #10
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    Ultimately time will tell what the potential of this engine in stock form is, but most workshops i've spoken to about running higher boost they've all indicated there is more left in the engine but they are playing it safe as if they push it too far and destroy an engine they'll be waiting a long time for a replacement engine.

    These engines have multiple knock sensors and 8 injectors, 4 regular and 4 direct into the combustion chamber.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 16th June 2012, 11:35 AM
  2. 4age turbo kit new or used
    By the_van_can in forum Cars or Parts Wanted
    Replies: 3
    Last Post: 17th October 2010, 06:24 PM
  3. Replies: 10
    Last Post: 24th August 2009, 12:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •