Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: New too the site!

  1. #1
    Junior Member
    Join Date
    Aug 2012
    Name
    Brad
    State
    New Mexico
    Location
    ABQ
    Country
    United States
    Posts
    14

    Default New too the site!


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    Hey every one my name is brad, im located in the US and i have a 1983 Corolla wagon. Recently i have done a sr20det swap in it useing ae86 motor mount swap brackets and ae71 trans swap brackets. The swap is almost complete i am just in need of more advice on this swap on what too do next too get it running and how too keep it running (rear end, suspension, stuff like that) But right now were trying to figure out the wiring were tieing the sr20det harness into the stock 4ac harness soo i can keep head lights, blinkers, break lights stuff like that. But we cant figure out which wires in the ignition should go to what, we have the wires for the sr20det harness ready to plug in (ignition signal, and switch) just not sure what ( light blue/red is, black/red is, black white is and black yellow is) if anyone could help ide really appreciate it along with more info for this swap thanks. Excited too be a part of this forum and cant wait too learn more about my car.

  • #2
    Junior Member
    Join Date
    Aug 2012
    Name
    Brad
    State
    New Mexico
    Location
    ABQ
    Country
    United States
    Posts
    14

    Default



    heres my swap so far

  • #3
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    Throw some photos up of the rig man, i can't help with any of the wiring info but i'm sure there's someone on here who can

  • #4
    Junior Member
    Join Date
    Aug 2012
    Name
    Brad
    State
    New Mexico
    Location
    ABQ
    Country
    United States
    Posts
    14

    Default



    Twin peaks car show bit ago, re painting the car black in next week or so will post pictures then.

  • #5
    Senior Member bradae85's Avatar
    Join Date
    Nov 2010
    Name
    Brad
    State
    Canterbury
    Location
    Papanui
    Country
    New Zealand
    Posts
    185

    Default

    Wrong section.

  • #6
    Junior Member
    Join Date
    Aug 2012
    Name
    Brad
    State
    New Mexico
    Location
    ABQ
    Country
    United States
    Posts
    14

    Default

    I did not see a place too introduce myself and post this thread could you show me or move it thanks
    Last edited by Ae71Sr20det; 29th August 2012 at 06:02 AM.

  • #7
    Senior Member bradae85's Avatar
    Join Date
    Nov 2010
    Name
    Brad
    State
    Canterbury
    Location
    Papanui
    Country
    New Zealand
    Posts
    185

    Default

    It's all good but post it in the *e7* owners part. This is for Ae86-85s. Sounds like a good start to your project though man!

  • #8
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,186

    Default

    I've moved the thread... welcome aboard. Will be a fun car when you have finished it.

    How far along with the wiring are you? Best bet is to to identify which wires were for the dizzy, ignition and mate them into the sr loom. Starter should be pretty easy to identify and mate up.

  • #9
    Junior Member
    Join Date
    Aug 2012
    Name
    Brad
    State
    New Mexico
    Location
    ABQ
    Country
    United States
    Posts
    14

    Default

    Quote Originally Posted by Matt View Post
    I've moved the thread... welcome aboard. Will be a fun car when you have finished it.

    How far along with the wiring are you? Best bet is to to identify which wires were for the dizzy, ignition and mate them into the sr loom. Starter should be pretty easy to identify and mate up.
    done everything but tie in the ignition wires too start the sr motor. we are not sure what wires too tap into is our problem

  • #10
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,186

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    Do you have a wiring diagram for the sr?

  • Page 1 of 3 1 2 3 LastLast

    Similar Threads

    1. new to the site
      By 1AE712C in forum Sydney & NSW Events and Discussion
      Replies: 3
      Last Post: 8th June 2011, 07:34 PM
    2. NEW TTUNED.COM SITE
      By Matty-KE70 in forum General Topics (No Technical Questions)
      Replies: 2
      Last Post: 11th June 2007, 08:59 PM
    3. Site Suggestions
      By Nox in forum General Topics (No Technical Questions)
      Replies: 9
      Last Post: 7th April 2005, 07:52 PM

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •