Page 1 of 5 1 2 3 4 5 LastLast
Results 1 to 10 of 44

Thread: Toyota Cressida MX83 / JZS171 VVTI (jzx110)

  1. #1
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default Toyota Cressida MX83 / JZS171 VVTI (jzx110)

    This started as an impulse buy back in Janruary this year from eBAY









    Originally I contacted the seller as I wanted to have a look at it, but got caught up with work and ended up letting it go. The auction finished and the buyer didn't contact the seller so a week later I got the call asking if i was still interested in it.

    A quick chat to the guy, and I was there with my brother to bring it home the following weekend. The family i bought it off must think cressidas are the only cars you are allowed to buy because the 2 of the kids had them, the old man had 2 and the wife also had one.

    I took it down for a blueslip a couple of weeks ago with the 7m in it and it was failed due to an exhaust and oil leak , which turned out to be a missing gasket after the headers and the sump plug washer was worn out. So I dumped the oil into a clean container, replaced the sump plug washer and put it back in again.

    I have the blueslip and rego now sorted.

  2. #2
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    I bought a jzs171 engine thinking it was a jzx100 without really looking into it too much...



    But I think aside from the etcs-i sensors breaking, I think this engine will be an easier install than the jzx100 as all the throttle body stuff is integrated into the ecu. If i get speed sensors , there is no real reason why i can't wire in the traction control as well.

  3. #3
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    I've managed to find the JZS171 ecu pinouts... They are the same as the jzx110.



    The 7m was removed over the weekend.




    It definately has a blown headgasket.



    or a closer look. Yep that is the tip of the spark plug sticking out of the chocolate milkshake.



    Though the oil out of the sump, whilst black was normal and the coolant was normal. I haven't managed to get the cam covers off yet, as a bead of what looks like toyota sump sealant has been run around it and the dizzy had the same.

    I'll probably pull it down to assist with easy disposal, but if anyone wants the 7m sing out.

    I also managed to source an LSD diff as well and I spent about an hour last night tracing the loom and i'm happy to the point where i'll be able to start the car now once the 1j goes in. Just those fiddly things like dash warning / automatic gear selected lights etc are left to nut out.

  4. #4
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    I need to have this running by the middle of October so i can confidently take it up to the Raleigh weekend. It shouldn't have any issues towing an ae71

  5. #5
    Senior Member
    Join Date
    Oct 2011
    Name
    Dion
    State
    NSW
    Location
    wagga wagga
    Country
    Australia
    Posts
    281

    Default

    Looks like a good little project mate.. I really should be getting one ready too but my mates car will do for now lol

  6. #6
    Senior Member s13 james's Avatar
    Join Date
    Aug 2010
    Name
    James
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    752

    Default

    these are pretty cool

  7. #7
    Gunner
    Guest

    Default

    This will be cool

  8. #8
    Senior Member Sprinter Freak's Avatar
    Join Date
    Jun 2010
    Name
    ryan
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    600

    Default

    Will be an epic tow car once its done.

  9. #9
    Veteran AJPS's Avatar
    Join Date
    Nov 2008
    Name
    David
    State
    SA
    Location
    Lonsdale
    Country
    Australia
    Posts
    4,245

    Default

    110 1jz are sick
    - 10 year anniversary Tshirts http://www.ae86drivingclub.com.au/fo...irts-group-buy -

    Garage sale http://www.ae86drivingclub.com.au/fo...3-autumn-sales Specials on front end kits - pm me


  10. #10
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    Minor update, spent most of the day tracing out the loom of the jzs171 and am very confident that when i drop it in it should start.

    Also spent a couple of hours degreasing / washing down the engine bay to make it look that smidge better.

Page 1 of 5 1 2 3 4 5 LastLast

Similar Threads

  1. mx83 cressida
    By hillzy in forum Cars for Sale (Toyota Only)
    Replies: 4
    Last Post: 5th December 2012, 11:25 PM
  2. MX83 Cressida
    By Adash =P in forum Cars for Sale (Toyota Only)
    Replies: 4
    Last Post: 26th September 2009, 07:04 PM
  3. MX83 Cressida and 1JZGTE
    By Hipsi in forum Cars for Sale (Toyota Only)
    Replies: 9
    Last Post: 30th March 2009, 03:00 PM
  4. FS: Toyota MX83 Cressida
    By Bustin_86 in forum Cars for Sale (Toyota Only)
    Replies: 1
    Last Post: 3rd June 2008, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •