Results 1 to 7 of 7

Thread: 15/16th Master Cylinder to ADM Booster

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member wideslider's Avatar
    Join Date
    Dec 2008
    Name
    Ben
    State
    NSW
    Location
    Sutherland
    Country
    Australia
    Posts
    485

    Default 15/16th Master Cylinder to ADM Booster

    Hi Guys,

    I know this has been covered in various threads but am struggling to find any consistency in the information.

    I have an ADM Booster and want to go to a 15/16 or 1 inch bore MS and want to know my options.

    The Nissan BM44 appears to be the easiest solution due to the built in bias valve but what is the difference between the ABS and non ABS models?

    Also where can I buy a new Booster and Master from thats well priced?

    Any help would be much appreciated.

    Cheers.

  2. #2
    Veteran johl's Avatar
    Join Date
    Dec 2008
    Name
    Johl
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    2,812

    Default

    the difference is i believe the abs model has an extra outlet on the master for another brake line. i bought my r32 non abs master and booster together from jdm garage for $100. with a slight massage the booster fits fine
    stroked 2L ca18-ae86 in the build...eta xmas 2012?

  3. #3
    Member _sawyer_'s Avatar
    Join Date
    Feb 2010
    Name
    Paul
    State
    VIC
    Location
    West melbourne
    Country
    Australia
    Posts
    95

    Default

    Hey mate, Im running a s14 abs bm44 M/C on an ae86 with drum brake rears and hilux disc fronts.
    It fits up great and you will only have to make two new lines being a twin outlet and using the stock brake line manifold thing that splits the front into two lines.
    As far as the operation tho, I am having trouble bleeding the system, but im hoping its due to the brakes lines sitting around off the car dry as a bone for a year.
    So having said that is not very useful info but if you decide to use it, J.A.K motorsport in campelfield victoria sell them for $50 pick up

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Name
    Mark
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    783

    Default

    Im running a pajero mastercylinder with rx7 calipers and t18 drums, works perfectly, bolts up nicely. Only issue I found is that the 2 ports have a different flare on them, So one works with your standard line the other line needs the end changing
    Launceston = Home of the surprise sodomist!!

  5. #5
    Senior Member wideslider's Avatar
    Join Date
    Dec 2008
    Name
    Ben
    State
    NSW
    Location
    Sutherland
    Country
    Australia
    Posts
    485

    Default

    How did you change the end? Re flare it or step the line up to a different size?

    Thanks everyone for the input

  6. #6
    Senior Member
    Join Date
    Jan 2009
    Name
    Mark
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    783

    Default

    I took out the shortest line and took it and the paj mc in to my local abs and said can I get this end changed to suit this and this end keep the same. It took a couple of tries cos my local store is a bit retarded but got it in the end!!!
    Launceston = Home of the surprise sodomist!!

  7. #7
    Veteran maxhag's Avatar
    Join Date
    Dec 2008
    Name
    JoJo
    State
    ACT
    Location
    Tuggeranong
    Country
    Australia
    Posts
    2,786

    Default

    I have used the R32 NON ABS Master cyl in 2 of my 86's. Cheap, direct fit, Has a good pedal feel with various brake setups...

Similar Threads

  1. adm brake master cylinder - aftermarket options
    By skit in forum Technical - Questions
    Replies: 10
    Last Post: 3rd November 2010, 10:54 AM
  2. WTB ae86 brake booster/master cylinder QLD
    By Beetle in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 3rd August 2010, 09:19 PM
  3. WTD, 4AGZE outlet, cat, and ADM master cylinder
    By bunkyskids in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 7th June 2009, 02:22 PM
  4. ae86 brake booster and master cylinder
    By riojin in forum Cars or Parts Wanted
    Replies: 7
    Last Post: 3rd October 2007, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •