how tight do fly wheel bolts have to be !!!'??

[ke2483]

hay what do i set my torque wrench at to tighten my flywheel on my 20v 4AGE silvertop


ANYONE KNOW??

[lolwat]

fucking tight, with loctite

[Gunner]

Exactly what I was going to say. Hahaha..

[ke2483]

haha yeah i know that but i need to know the numbers thanks anyways

[lolwat]

whats the highest on your torque wrench?

[Rice86]

HAHAHAHHAHAHAHAHAHAH



yeah dude as tight as the bolt will allow before you snap something, but good luck snapping something before you pull a muscle..anyways after all these clutch and flywheel changes on stock motors that sees 7500 very often, super hand tight has worked enough so tight as tight and you'll be alright.

[blake.]

I have never looked it up for a 4age, but cars at work (VW) are 90nm+90 degrees with loctite from memory.

That's what I did to mine 2 years ago and it hasn't come off, touch wood, but I didn't use loctite as I didn't have any.

[Skylar]

totally irrelevant but CA18 is 98-108Nm/72-80lb.ft

Also, overtightening is better than undertightening.

[matho]

The flywheel bolt torque for a 4age 20v bt is 75nm's.
I presume the tension would be the same for bt and st
And thats straight out of the toyota workshop manual

[rthy]

don't over do it, they are only 14mm bolts