Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Genuine 4AGE high flow & strengthened oil pumps

  1. #1
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default Genuine 4AGE high flow & strengthened oil pumps

    Genuine oil pumps with the upgraded wide gears featuring the round teeth.




    Also comes with base and pick-up gasket and the crank main seal.


    This can be readily fitted to the earlier 4age engines that have the prone to snap square teeth.

    Pic showing the size difference in width from another genuine type:



    This should be of particular importance to people running 7afe bottom ends as they likely recieved this type.


    These are guarenteed to be the best type available out of all the pumps.


    Price: $180 inc GST


    It is likely that I will also offer pumps that have been pre-ported for higher flow again for a small extra cost.
    Last edited by Sam-Q; 30th April 2013 at 10:59 AM.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  2. #2
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    Also of note there are pumps on ebay right now that are real cheap. One of the toymods guys bought one and it was crap in his eyes, so buyers beware!
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #3
    Junior Member
    Join Date
    Feb 2012
    Name
    Sam
    State
    South Australia
    Location
    Mitchell park
    Country
    Australia
    Posts
    16

    Default

    What sort of power/rpm can these handle??

  4. #4
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    Apparently they let go at about 9000 after a while, however I have have some TODA gears here soon, if you install them you can leave it much more
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  5. #5
    Junior Member
    Join Date
    Feb 2012
    Name
    Sam
    State
    South Australia
    Location
    Mitchell park
    Country
    Australia
    Posts
    16

    Default

    Awesome how far off are you from getting the toda gears? And could I have a price shipped to 5159? Cheers

  6. #6
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I am expecting them any day now. Postage for the gears alone is $8, for the pump together it's $13
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  7. #7
    Junior Member
    Join Date
    Feb 2012
    Name
    Sam
    State
    South Australia
    Location
    Mitchell park
    Country
    Australia
    Posts
    16

    Default

    I'm presuming they fit all 4age? I have a smallport. If yes then I'm keen to take a pump off your hands

  8. #8
    Senior Member Mirko's Avatar
    Join Date
    Mar 2013
    Name
    Mirko
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    792

    Default

    I have a 4GZE so assuming no issue to bolt up for me? shipping to sydney CBD?

  9. #9
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I have compared them to a 16V and I could see no differences. Technically there shouldn't be and only the blacktop should have something externally different. Just for the record I have used internally stock silvertop engines with the same type of pump but 15+ years old and rev them to my 8600 limit almost every time their driven. I have had two crank pulleys fail but nothing else.

    The pumps are $180 unmodified and $50 extra if their ported, the TODA gears also arrived today. To run the TODA gears you can get a second hand silvertop pump and put these in or buy one of mine and swap them. The TODA gears are not cheap.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  10. #10
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    forgot to mention $13 for the pump sent to anywhere in AU or $8 for the gears alone
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Oil cooler kit + oil pumps + fuel rail + ae71 tach dash
    By Sam-Q in forum Car Parts For Sale
    Replies: 4
    Last Post: 26th July 2012, 11:31 PM
  2. quadlight wiring and oil cooler flow questions ke70, 4age
    By cooter in forum Technical - Questions
    Replies: 7
    Last Post: 1st April 2012, 12:32 PM
  3. high flow cat worth it?
    By Tim.duncan in forum Technical - Questions
    Replies: 7
    Last Post: 20th September 2011, 10:11 PM
  4. 4age oil pumps
    By cracker in forum Technical - Questions
    Replies: 4
    Last Post: 7th August 2010, 11:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •