Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: (VIC) KE70 parts. 5 speed manual conversion, flat front panels, wheels etc.

  1. #1
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default (VIC) KE70 parts. 5 speed manual conversion, flat front panels, wheels etc.

    ELECTRICAL


    Brand new Top Gun 4k spark plug leads - $25
    Repco 4k spark plug leads, worked fine when car was running - $5
    KE70 Bosch alternator, worked fine when car was running - $25 SOLD
    Near new Bosch SU 12R ignition coil, used for not even 500kms. - $35
    Bosch GT40R ignition coil, not sure on condition, but was running ok when my car was running - $20 SOLD
    RACV Battery, about 6 months old. out of charge but is like new - $50


    MOTOR/GEARBOX


    5 speed K50 manual conversion, comes with EVERYTHING! starter, tailshaft, pedal box, clutch cable set up etc. comes with a brand new exedy clutch kit aswell (will not seperate) - $450 SOLD
    Ported 4k head (rocker cover included with new gasket and pcv valve) with heavy duty valve springs. head gasket and thermostat + thermostat housing included (found out theres a bit of a dent on the face, not sure if it will come it with a resurface + thicker head gasket) $100 SOLD

    k motor extractors, good condition - $150

    k motor twin carb manifold (webers/dellortos), had another fitting drilled and tapped in opposite runner - $200
    Bare, stock 4k head. not sure if warped. (still has valve springs and valves) - $20
    Reconditioned KE70 radiator, used for about 500kms. comes with near new hoses and shroud - $100 SOLD
    Stock 4K carby with intake + air cleaner (ran fine when car was running, low k's) + manifolds. $30 CARBY SOLD
    KE70 full exhaust, first half a bit rusty, second half and muffler no rust, only a couple thousand k's old - $40 SOLD

    ARP 4k head studs and nuts - $80 SOLD


    PANELS


    Flat front panels in primer, no rust. comes with everything. beaver panel, scuttle panel, lights, indicators, grill, bumper etc. - $350 SOLD
    All doors for sale aswell, no rust and all straight. the passenger door had rust (bogged) all glass perfect, door cards not included - $40 each SOLD


    WHEELS


    PAIR 13x6.5? 4x114.3 GENUINE SSR MK.3's, nothing sepcial, bit of rash. $250
    PAIR 14x7? 4x114.3 Centreline copies, very good condition. $250
    4 full tread 13/165 tyres. 2 bob jane, 2 some other brand - $120


    SUSPENSION

    Standard rear shocks - $30
    Standard rear springs, uncut - $20
    Brand new Gabriel Ultra VN wagon short stroke shocks - $80



    near new rear lenses & globes, about 3-4 months old. - $25 each RIGHT TAILLIGHT SOLD




    tacho dash, cracked glass - $60
    clock dash, low k's - $20


    SSL ford au king springs, uncut. $80 SOLD
    4k hi cam plastic fan and pulley, fan has 2 broken bolts. - $10 SOLD
    near new 4k hi cam water pump, still brand new inside, comes with bypass hose and bolts. no gasket - $40
    4k fan belt, looks good. - $5
    Speco mechanical fuel pressure regulator 1-6psi, has hose fittings but not sure what size. used a handful of times - $50

    4k mehcanical dizzy - $20
    ke70 brake booster and master cylinder, no leaks - $60




    NEGOTIABLE ON NEARLY ALL ITEMS!


    THESE ARE ALL OFF A COMPLETE KE70 THAT I AM PARTING OUT, ASK AND I MIGHT JUST HAVE THE ITEM YOU NEED (I AM NOT PARTING OUT INTERIOR OR DIFF/FRONT SUSPENSION/BRAKES AS OF YET)


    located in northern suburbs, pictures up tomorrow






    Last edited by jluc93; 16th April 2013 at 08:03 PM.

  2. #2
    Moderator dove grey 64's Avatar
    Join Date
    Aug 2010
    Name
    Geoff
    State
    VIC
    Location
    mt dandenong
    Country
    Australia
    Posts
    2,437

    Default

    13" ssr mk3's, pair or set?

  3. #3
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    Yeah, they're a pair. Should of specified.

  4. #4
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    bump!!!!!!!!

  5. #5
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    extractors and twin carb manifold now for sale

  6. #6
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    added some more suspensions parts

  7. #7
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    bump

  8. #8
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    bump

  9. #9
    Senior Member *E7*'s Avatar
    Join Date
    Jan 2009
    Name
    Dave
    State
    VIC
    Location
    Eastern Melb.
    Country
    Australia
    Posts
    464

    Default

    Still got :

    Stock 4K carby with intake + air cleaner (ran fine when car was running, low k's) + manifolds???

  10. #10
    Junior Member
    Join Date
    Jun 2011
    Name
    Julian
    State
    VIC
    Location
    Northern Suburbs
    Country
    Australia
    Posts
    5

    Default

    Yeah mate, still got it.

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. **VIC** KE70 Flat front conversion
    By Shitbox in forum Car Parts For Sale
    Replies: 0
    Last Post: 7th September 2012, 01:11 AM
  2. [VIC] KE70 Full Flat Front Conversion
    By Bluterus in forum Car Parts For Sale
    Replies: 1
    Last Post: 16th July 2012, 01:36 PM
  3. QLD beige flat front conversion & manual kit for KE70
    By J0RD0 in forum Car Parts For Sale
    Replies: 1
    Last Post: 3rd January 2012, 12:27 AM
  4. WTB: E7 flat front quarter panels VIC
    By adam_loves_hachi_roku in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 26th November 2009, 08:44 PM
  5. Replies: 0
    Last Post: 11th April 2009, 06:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •