Results 1 to 10 of 10

Thread: [SYD] KE70 flat front. White. No rust. 4K 4sp. $1700

  1. #1
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default [SYD] KE70 flat front. White. No rust. 4K 4sp. $1700


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    I don't need my little run-about anymore, so its up for sale.
    Bought this from a fellow rolla fan in Canberra.... so its a genuine no-rust car, and has been well looked after.


    Car - 1983 KE70 Corolla
    KMs - 145,000, genuine
    Transmission - 4sp manual
    Rego - none, but have just got it blue slipped

    Features:
    - currently sits on Kings low fronts, and Kings standard rears
    - will supply with a set of super low choppies, and some unchopped stock rear springs, so you can chop to your desired height if you wish
    - good quality shocks all round
    - starter motor relay fitted (starts perfectly now, no issues, even when left for a couple of weeks)
    - near new battery
    - blue interior (no brown p00)
    - very clean for its age
    - virtually NO RUST.... and definitely no rust in wheel arches!!


    Will be supplied with STOCK 13" steel wheels with 50% tread.
    MA61 wheels are NOT AVAILABLE.

    $1,700
    Located - Baulkham Hills, Sydney.

    Contact - Karl.... PM me for phone number and stuff, or post here.

    NO SWAPS. CASH ONLY.


    NOTE: MA61 wheels pictured not available. This pic taken with super low chopped springs fitted.




    Bonus parts (available at extra cost)
    - AE71 manual pedal box $350
    - AE71 master/slave clutch cyliners $40
    - AE71 manual tailshaft $75
    - AE86 T50 gearbox (only been behind a 4AC) $350
    - KE70 exhaust suit 4age $100
    **Buy all for deal price $800

    .... just add one of the KE70->4age mounting kits, EFI fuel system, and a 4age engine/loom/ecu.... and you have yourself a 4AGE KE70.
    KE70 Turbo 18R-G - Project Skid Car

  • #2
    Senior Member ach_66's Avatar
    Join Date
    Oct 2009
    Name
    Azz
    State
    NSW
    Location
    Newcastle
    Country
    Australia
    Posts
    128

    Default

    Interested. Any chance of some more pic's? Interior, engine bay, boot.

  • #3
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default

    Interior needs a tidy up, so will try to get around to that.
    More pics soon
    KE70 Turbo 18R-G - Project Skid Car

  • #4
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default

    didnt bother cleaning it up.... to its a little dirty.

    NOTE: the steering wheel that's fitted is NOT included. Stock steering wheel will be put back on.











    .... and here's how it currently sits. As mentioned, the rears are standard height king springs, but the fronts are low.
    Personally i'd just throw in a pair of king lows in the rear and be happy with that. $130/pair on ebay.
    ... but you could also re-fit the uber chopped springs if you so wish

    KE70 Turbo 18R-G - Project Skid Car

  • #5
    Junior Member
    Join Date
    Aug 2012
    Name
    Keegan
    State
    New south Wales
    Location
    Wollongong
    Country
    Australia
    Posts
    17

    Default

    Just what I'm looking for, just like 2 months early! Looks sick

  • #6
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default

    Bump.

    Looking for a good home here guys. Seriously, this is a damn clean KE70, with less rust than ive seen on any KE70.
    KE70 Turbo 18R-G - Project Skid Car

  • #7
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default

    I've had these question a couple of times now, so i'm going to provide this information up front.......

    Buying from Interstate:
    Yes, you can get an unregistered vehicle permit from the RMS (formerly RTA) if you want to drive it interstate - however, I WILL NOT DO THIS FOR YOU, because I will not be the one driving the car, and thus I will not take responsibility for someone else. If you want to clarify details, call the RMS to get info.

    Information on unregistered vehicle permits is here: http://www.rta.nsw.g...hicles/uvp.html
    They don't cost much, and since I already have a blue slip on the car that covers the safety inspection that is required. You just have to go into the RTA and pay the fees.


    Buying from a distance, but in NSW
    If you are coming from a distance within NSW, I am not going to put rego on the car for you, unless you pay the cost of rego up front (non-refundable).
    If you are serious about buying, come on a saturday morning.
    Iif you are happy and decide to buy, you just go to the RTA with the documents that I already have, as well as the old ACT number plates, and get it registered in your name and drive home, all done.


    When does the Blue Slip expire?
    The RMS has recently updated their rules..... blue slips are now valid for 42 days.
    Hence, the blue slip I have will expire on the 18th Jan (got it on the 8th Dec).


    Am I negotiable on price?
    Sorry, but No.
    I've priced the car as is, and I'm not in a huge rush to sell.
    don't expect to offer me $1300 and land yourself the bargain on the century...... aint gunna happen. This is a competitive price for the car in the excellent condition it's in.


    Are there any issues to be aware of?
    Only one.... which is more annoying than an actual issue - the rear left bearing is noisy. I have a brand new bearing/seal kit for the rear end, but havent got around to fitting it, thanks to being time poor. Bearing kit comes with the sale of course, and i've considered this issue in my asking price.
    I drove the car back from canberra with the bearing this way, and other than being noisy it was fine.... has not got any worse.


    Could I drive it back to QLD/Mel/Timbucktoo??
    I'd probably recommend getting the rear bearings replaced just for peice of mind.... but other than that - it will easily make the long haul trip.


    I hope i've covered most questions now
    KE70 Turbo 18R-G - Project Skid Car

  • #8
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default

    Deposit taken....
    KE70 Turbo 18R-G - Project Skid Car

  • #9
    Junior Member
    Join Date
    Aug 2010
    Name
    Aaron
    State
    NSW
    Location
    Randwick
    Country
    Australia
    Posts
    0

    Default

    was this car sold mate?

  • #10
    Member the witzl's Avatar
    Join Date
    Jul 2012
    Name
    Karl
    State
    NSW
    Location
    Hills District
    Country
    Australia
    Posts
    54

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    Yes it was, to a very happy buyer.
    KE70 Turbo 18R-G - Project Skid Car

  • Similar Threads

    1. White KE70 flat front, respray, cheap
      By adam_loves_hachi_roku in forum Cars for Sale (Toyota Only)
      Replies: 0
      Last Post: 3rd February 2011, 05:22 PM
    2. Parting flat front ke70 wagon (white)
      By Jacobxxx in forum Car Parts For Sale
      Replies: 14
      Last Post: 18th April 2010, 09:32 PM
    3. white KE70 flat front $400 Vic
      By adam_loves_hachi_roku in forum Cars for Sale (Toyota Only)
      Replies: 9
      Last Post: 8th October 2009, 08:28 PM
    4. SA: '84 Ke70 Flat front Wagon $1700
      By Stretch31 in forum Cars for Sale (Toyota Only)
      Replies: 12
      Last Post: 25th July 2009, 05:22 PM
    5. QLD: 1982 Flat Front White KE70
      By gumbie in forum Cars for Sale (Toyota Only)
      Replies: 2
      Last Post: 4th February 2009, 12:43 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •