Finally getting around to do this.
4AGTE is not going ahead.
Motor will be Blacktop 20V.
BODY/EXTERIOR:
2pak hot house green with gold sparkle.
Has small rust bubbles coming up in the bottom of the tailgate that needs attention.
Has a 50c bit of cancer in a front passenger rail where the factory shipping/tow point, small pin dents in passenger 1/4 and front guard, scratch mark in paint on bonnet.... Good base...Have no idea how many Km's its done
Upside down Toyota Badge on grille
Staying pointy nose
INTERIOR:
Has had 5 seat conversion done with mod plate.
Driver Recaro LS fishnet head rest seat.
Has KE70 Non Tacho Dash installed with full KE70 donor wiring loom (cabin and engine bay)
Battery re-located rear
ENGINE:
Blacktop 4A-GE 20V
SQ rwd conversion parts
SQ 50mm billet stacks with ITG Twin DCOE Foam Filters with mesh inserts (don't suck in)
SQ COP conversion Yaris coils
Microtech LT10S with hand controller
Stock injectors
Ebay AE71 alloy 3 row radiator
FUEL SYSTEM:
Has modified stock AE71 Pano tank - Has sump / surge tank welded into the bottom of it with 10an fitting, steps down to 8an to aeroflow 30micron pre pump filter, to Walbro 155LPH (supports up to 400hp) with 8an fittings up to 10micron post pump filter in engine bay, to factory 4age blacktop fuel rail,
All hose is stainless braided 8an.
All fittings and filters are stealth black finish.
DRIVELINE:
W55? - Was sold to me as W57, but isn't, ratio's are wrong for W57.
Niteparts W series bellhousing
Niteparts 1GFE starter motor conversion
NPC ceramic 5 puk sprung centre clutch with custom beefed up Pressure plate
Driveline services Custom Tailshaft rated to 300hp
Stock Diff S series with factory pano 3.5:1 ratio
BRAKES:
MA61 Hubs and Vented Disc's (fits larger XT130 stub axle)
MX62 Calipers with custom machining on XT130 Strut/Caliper mount to make it works!
Standard rear drums
SUSPENSION:
XT130 Struts with Otomoto weld on coilover sleve kit
8kg springs
Front Gaz adjustable shock absorbers
Cusco? blue adjustable camber tops
Billet Techno Toy Tuning PS knuckles
XT130 Lower Control Arms with brand new Ball joints
AJPS Motorsport Adjustable tie rod ends
Stock rear leave's with blocks
WHEELS:
Work Equip 01's 14x7j with185 60 14's