You can remove the rubber from the base and depin the pins and add new ones.
when I brought my 4age it came out of an ae82 corolla and the person that pulled the motor out butchered parts of the loom and they also cut the wires on the map sensor right at the base of the unit and on the other side of the plug so I had no plug for it all, I brought another map sensor with a plug and I've got the wires that go to the map sensor but I'm just a bit unsure of there joining order
Does it go
Yellow - yellow
Red - green
Black - brown
Or am I way off?
You can remove the rubber from the base and depin the pins and add new ones.
Ae86 Drivingclub - Toyota AE86 Car Club where AE86 | KE70 | Toyota 86 / GT86 | Subaru BRZ | Scion FRS owners
Yeah I thought of doing that I'm just going to put in a new plug that's why I wanna double check that I'm conecting the right wires
Logic tells me yellow>yellow, Pink>Green, Black>Brown.
Yeah that's what I thought just wanted a second opinion tho
Thanks to ^^;
So I had my map sensor wired in as above and it was running pretty rough and I thought something might of been wrong so I went to pick a part a few weeks ago and found an intact map sensor on a ae82 with said 4age same as mine and the wiring above is wrong it goes!
Brown to black
Green with red to yellow
Yellow to red
Just tried it and motor runs so much smoother!