Results 1 to 10 of 10

Thread: Itb's and some other goodies

  1. #1
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default Itb's and some other goodies

    Ok I'm doing a cleanup of some JDM shit I'll be adding more as I find it


    1. A set of blacktop itb's complete minus tps
    2. A set of silvertop itb's complete with tps
    3. TRD lead set for 4age 16v
    4.t50 gearbox
    5.t50 gearbox

    Prices
    1. 370 Ono
    2. 300 Ono
    3. 80 Ono
    4. sold
    5. 470 ono

    condition and details
    1. fully cleaned no corrosion ready to bolt on can block off all un used vacume ports for a clean look
    2. fully cleaned no corrosion ready to bolt on or use on a 16v can also block off all un used vacume ports
    3. clean and low resistance checked recently have been siting in a box
    4. a spare t50 i have laying around complete with shifter as is condition
    5. my current t50 jdm bell comes with c's short shifter has a brass shifter bush kit alone worth $200 out of japan has ae71 gearbox crossmember and sam-q spacer for 20v seals bearings and syncros in good shape has clutch fork and bearing with near new carrier there is alot of money in this box can be taken for a drive before taken out if bought soon

    Location is Sutherland shire Sydney nsw
    Contact through pm
    Last edited by pen15; 7th March 2013 at 10:26 PM. Reason: more parts added
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  2. #2
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    bump more parts added
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  3. #3
    Senior Member JDMWheels's Avatar
    Join Date
    Sep 2010
    Name
    Daniel
    State
    NSW
    Location
    Sydney North
    Country
    Australia
    Posts
    302

    Default

    PM Sent

  4. #4
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    this is the blacktop throttles they are clean but still need am little bit more to be perfect
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  5. #5
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    stock t50 sold
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  6. #6
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    Throttles look mint...how'd you clean them up?

  7. #7
    Senior Member JDMWheels's Avatar
    Join Date
    Sep 2010
    Name
    Daniel
    State
    NSW
    Location
    Sydney North
    Country
    Australia
    Posts
    302

    Default

    Also Curious!

  8. #8
    Junior Member
    Join Date
    Dec 2012
    Name
    aaron
    State
    NSW
    Location
    cecil hills
    Country
    Australia
    Posts
    0

    Default

    check your inbox!

  9. #9
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    media blaster and alot of elbow greese cleaning all the grit out i still have to completely strip them and keep cleaning them they are almost done
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  10. #10
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    bump
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

Similar Threads

  1. silvertop itb,s
    By a222133 in forum Cars or Parts Wanted
    Replies: 3
    Last Post: 28th December 2012, 09:17 AM
  2. 16v Smallport w/ S/T ITB's
    By 08ftwyo in forum Technical - Questions
    Replies: 10
    Last Post: 20th May 2012, 10:22 PM
  3. ST ITB's + Smallport?
    By stahlz_ae86 in forum Technical - Questions
    Replies: 5
    Last Post: 15th July 2009, 11:28 PM
  4. turbo and itb?
    By 510lj in forum Technical - Questions
    Replies: 12
    Last Post: 19th June 2008, 11:47 PM
  5. ITB or CAMS??
    By DK86 in forum Technical - Questions
    Replies: 6
    Last Post: 30th July 2007, 11:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •