Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21

Thread: WTB: 4AGE performance parts

  1. #1
    Member
    Join Date
    Dec 2011
    Name
    Craig
    State
    TAS
    Location
    Granton
    Country
    Australia
    Posts
    33

    Default WTB: 4AGE performance parts

    Longshot, I know.

    I am after new unused 4AGE performance parts for the replacement engine that I plan to build over the next year for my AE86 rally car.
    So, if anyone has any new parts from a project that wasn't completed, let me know.

    The wanted list:

    High lift CAMS. Looking for 272 up to 288 duration in about 9mm or greater lift (very longshot finding those on here).
    Light weight front pulley.
    Shim under bucket lifters/followers.
    Cold air box to fit 110mm trumpets.

    It will be a hybrid bigport/small port 4AGE but I already have a used bigport head and a used smallport short engine so I just need the performance parts.

    Since I first posted this advert I've accumulated a fair bit so now I have: Haltech Sprint 500 & loom, factory 4age loom, Extractors, quads, manifold, valve springs, rods, pistons & Flywheel.

    I have offers for when I'm ready for trumpets, gaskets & oil pump and possibly some 1sz lifters but I don't know required sizes until I get the cams.

    PM or reply here.

    Craig
    Last edited by rallysprinter; 17th May 2013 at 10:43 PM. Reason: Removed more bits I've got already.

  2. #2
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    Not allot of difference between a 20v blacktop what you have spec'd there...

    Why not just buy one of them and be done with it...
    Ae86 Drivingclub - Toyota AE86 Car Club where AE86 | KE70 | Toyota 86 / GT86 | Subaru BRZ | Scion FRS owners

  3. #3
    Veteran AJPS's Avatar
    Join Date
    Nov 2008
    Name
    David
    State
    SA
    Location
    Lonsdale
    Country
    Australia
    Posts
    4,245

    Default

    can do the 110mm ram tubes

    pm me
    - 10 year anniversary Tshirts http://www.ae86drivingclub.com.au/fo...irts-group-buy -

    Garage sale http://www.ae86drivingclub.com.au/fo...3-autumn-sales Specials on front end kits - pm me


  4. #4
    Member
    Join Date
    Dec 2011
    Name
    Craig
    State
    TAS
    Location
    Granton
    Country
    Australia
    Posts
    33

    Default

    Even the most open rally car regulations require that the engine has to have the same number of valves as it came out of the factory with and so 20v doesn't make it. Currently the car runs under Production Rally Car (PRC) regs which require 4AGE big port head and 4A block.

    Thanks for the suggestion though.

  5. #5
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I should be able to supply the velocity stacks pending on the flange mounting:



    if their the same as 20v mounting then I have 100, 110 and 150mm in stock


    I also have 0.8mm TRD gaskets and various genuine parts.

    However I would need to make a call about the cams

    Is there an imposed rpm limit in your class craig?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  6. #6
    Member
    Join Date
    Dec 2011
    Name
    Craig
    State
    TAS
    Location
    Granton
    Country
    Australia
    Posts
    33

    Default

    Thanks for the post about the velocity stacks. I'll measure up.

    There is no rpm limit in the regs. For the age of the ae86, the limitations are basically can only use a 4AGE bigport head and 4A block and go nuts.

    But in competition driving in "blind" rallies with my driving style & gearbox/diff ratio combination, a RPM range of 4000-7500+ is required to pull out of those tight corners.

    Craig

  7. #7
    Gone
    Join Date
    Dec 2008
    Name
    Joel
    State
    NSW
    Location
    Picton
    Country
    Australia
    Posts
    4,042

    Default

    Hey mate I can supply you with all the parts you have listed above.
    Only ram tubes I have are 75mm..

    Pm me I can Do a package price for you if you buy it all..

  8. #8
    Senior Member JDMWheels's Avatar
    Join Date
    Sep 2010
    Name
    Daniel
    State
    NSW
    Location
    Sydney North
    Country
    Australia
    Posts
    302

    Default

    I can also supply you with TODA Valve Springs + any other Toda parts you may want =)

  9. #9
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default



    Just buy one of everything

  10. #10
    Member
    Join Date
    Dec 2011
    Name
    Craig
    State
    TAS
    Location
    Granton
    Country
    Australia
    Posts
    33

    Default

    I've got leads on trumpets & cams and gaskets etc for when I am ready to begin the build, from those who have already posted.

    The flywheel has just arrived.

    Still interested in any bits people may have stashed in the back of their garage that needs to go.

    Craig

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. 4agze performance parts, and other 4age bits
    By Nikkojoe in forum Car Parts For Sale
    Replies: 11
    Last Post: 8th February 2009, 01:12 AM
  2. AE86 PERFORMANCE PARTS 4 SALE
    By SoKAR in forum Car Parts For Sale
    Replies: 37
    Last Post: 27th March 2008, 11:54 PM
  3. Performance Parts For Sale
    By ancullen in forum Car Parts For Sale
    Replies: 9
    Last Post: 22nd January 2008, 01:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •