Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: Lukes Daily 86

  1. #1
    Senior Member luke20's Avatar
    Join Date
    Oct 2012
    Name
    Luke
    State
    Qld
    Location
    Brikdale/Redlands
    Country
    Australia
    Posts
    311

    Default Lukes Daily 86

    Hey fellas. I’m pretty new around here. I’m from brisbanes southside. Ive had my 86 for about 4 months or so. Big step up from my Gemini thats for sure. Haha. The 86 is a pretty cool car. I bought it pretty much stock.
    First i’ll start with what I’ve bought.
    · T18 T-series and TRD 2-way
    · Front and rear strut braces
    · Twincam steering wheel
    · Whiteline Adj panhard rod
    · AJPS 40mm RCA’s
    · Rosejointed Adj LCA’s
    · Front coilovers
    · P/S knuckles
    · 280 degree 8mm lift crow cams
    · Toda valve springs
    · Toyota water pump
    · Toyota timing belt
    · Adjustable cam gears
    · Roof spoiler
    · Boot spoiler
    · Full stainless lobster-back exhaust 2.5 inch. (under diff)
    · Skidders

    Oh and a hydro handbrake, cause the stock handbrake is fucking shithouse.

    And just small shit like a service, new plugs, and all new oils. Heres some of the specs...
    Engine/ Driveline:
    4AGE conversion, Bigport
    TRD style Extractors
    JDM T50
    Exedy H/D clutch
    T-series with TRD 2-way

    Suspension:

    Front:
    Front strut brace
    Weld on coilover sleve kit. Goes fucking looooow.
    T3 camber tops
    Tien Springs, shortened shocks
    Power steering Knuckles (shorter)
    AJPS 40mm RCA’s
    AJPS lockspacer
    Rosejointed Adj LCA,s
    Rebuilt front calipers with new pads
    New RA60 rackends, New outer tie rod ends and new rack boots,
    New Nolathane bushes throughout car

    Rear:
    TRD 6kg rear springs,
    (still need to get adj spring seats)
    New heavy duty short stroke shocks
    (need to get shorter ones)
    Whiteline Adj panhard rod
    Rear strut brace

    Interior:
    2004 Subaru impreza Bucket seats (modplated)
    Twin-cam steering wheel
    TRD gear knob
    Hydraulic handbrake (hidden under dash)
    Custom kiddies floor mats..
    Fake Defi Oil pressure gauge

    Exterior:
    Roof spoiler
    Small boot Spoiler (getting painted)
    Bonnet risers
    15x6.5 +15 Almex mesh(I think?) on the front
    15x8 +5 Nemotos on the rear.
    New wheels arriving at the end of feb.
    Also a full set of the almex meshies will be for sale soon.
    Let me know if your interested.

    Ive done a few wheelies and screechies in it. Goes well for a fairly stock car. About to do my first morning sesh on the 27th. Well first one apart from the all day sesh last year. Where I fucked a rim and bent an axle. Haha. Photo of rim is below Also done 2 friday night sessions.

    Some time before morning sesh im going to put my cams in. I bought them and thought I may aswell do the rest of it like water pump, t-belt, H/D vlave spring and Adj cam gears. So id like to have that done soon. Should go pretty good then.

    Like I said earlier I still need to get adjustable rear spring seats and shorter rear shocks. But that can wait a bit, got a pair of wheels in a container from japan. So once they arrive I will have a full set of baller wheels.

    And the best part of all is my ITB’s which I purchased last week. That includes
    Silvertop 20v itbs
    - machined alloy trumpets
    - t3 billet manifold for bigport 4age
    - earls fitting for all the vacuum lines
    - blox vacuum distro block
    - complete loom for the set up
    - adaptronic ECU tuned for 4age bigport with this exact setup
    - smallport dizzy (used for the setup)
    - MAP sensor (I think? to sample air temp/press close to the itbs?)
    Also bought a Sard fuel pressure Reg. Still need to find a set of filters for the trumpets...

    So I will put that On after Morning sesh. I thought about doing it before MS but I dont want to run into problems and risk loosing my spot for MS.

    Also bought a pair of Watanabe's today. I think I'll use them as skidders lol

    I'm always up for a chat and to meet new people. So if you see be around come say hey. Keen to get some NA trains going one day too. That would be fucking epic as shit on a stick.

    Anyways enough talking Ill show you some pictures..















  2. #2
    Senior Member briigo82's Avatar
    Join Date
    Dec 2010
    Name
    Josh
    State
    qld
    Location
    Strathpine
    Country
    australia
    Posts
    238

    Default

    Looks nice man. This should go awesome when you get a tune.

    Great Job

  3. #3
    Member jackthecat's Avatar
    Join Date
    Jul 2010
    Name
    Jack
    State
    QLD
    Location
    Ferny Hills
    Country
    Australia
    Posts
    62

    Default

    looks good luke have to post up what power u get tonight. hope the tune goes well today.

  4. #4
    Senior Member luke20's Avatar
    Join Date
    Oct 2012
    Name
    Luke
    State
    Qld
    Location
    Brikdale/Redlands
    Country
    Australia
    Posts
    311

    Default

    So I got my car Dyno'ed on thursday. Pretty happy with the outcome. I was 2hp off my target. Drives a lot nicer, has a little brap brap to it and is much more responsive. Cant wait to get out on track to test it out


  5. #5
    Veteran joeschmo_57's Avatar
    Join Date
    Jan 2009
    Name
    Joe
    State
    NT
    Location
    Nightcliff
    Country
    Australia
    Posts
    1,593

    Default

    That's a pretty decent number for a big port! What are the cam specs?
    Quote Originally Posted by Jdm-Mcc View Post
    quit hatin get bakin!

  6. #6
    Senior Member luke20's Avatar
    Join Date
    Oct 2012
    Name
    Luke
    State
    Qld
    Location
    Brikdale/Redlands
    Country
    Australia
    Posts
    311

    Default

    cheers dude. specs are 280 degree with 8mm lift. crow cam so Ive been told.

  7. #7
    Member Az86's Avatar
    Join Date
    Mar 2012
    Name
    Aaron
    State
    QLD
    Location
    The Gap
    Country
    Australia
    Posts
    30

    Default

    F#ck yeh Luke your 86 is looking clean as! Nice job.
    I'm goin to sell my S15. I have the 86 itch again. Lol

  8. #8
    Senior Member luke20's Avatar
    Join Date
    Oct 2012
    Name
    Luke
    State
    Qld
    Location
    Brikdale/Redlands
    Country
    Australia
    Posts
    311

    Default

    fuck yeah dude! 86's are the way to go without a doubt!

  9. #9
    Member slpery86's Avatar
    Join Date
    May 2010
    Name
    Rob
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    94

    Default

    Yeah az I miss seeing your 86 when I'm delivering in samford!

    Luke, action shots?
    ハチロク

  10. #10
    Senior Member luke20's Avatar
    Join Date
    Oct 2012
    Name
    Luke
    State
    Qld
    Location
    Brikdale/Redlands
    Country
    Australia
    Posts
    311

    Default

    Yeah for got a fair few action shots. Will post some up soon. Also got a fair bit to update with my car too. But I will wait till more parts arrive

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Wrighty's Daily 86 Project
    By Wrighty86 in forum AE86 Owners Forums
    Replies: 16
    Last Post: 3rd December 2012, 07:06 PM
  2. Lukes 4agze 86
    By 86TRD in forum AE86 Owners Forums
    Replies: 158
    Last Post: 8th November 2012, 08:20 PM
  3. Clean as daily 86
    By trikzlane in forum Cars for Sale (Toyota Only)
    Replies: 6
    Last Post: 16th October 2009, 10:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •