Results 1 to 6 of 6

Thread: WTD: 4AGE 20v ST intake cam, cap plate, crankshaft timing pulley

  1. #1
    Junior Member
    Join Date
    Apr 2010
    Name
    Dana
    State
    Qld
    Location
    Ipswich
    Country
    Australia
    Posts
    6

    Default WTD: 4AGE 20v ST intake cam, cap plate, crankshaft timing pulley

    Hey guys,

    Im chasing an intake cam in good condition with little wear to replace mine that has a scored journal, and I also need the lower bearing cap plate that bolts to the head under the cam to go with. Will take a pair of cams if I have to and maybe even a dead head if the cams are good and the price is ok. Prefer Brisbane for these bits as the cam's a bit heavy to post.

    Also after a crankshaft timing pulley to replace mine that was accidentally damaged pulling it off. FOUND

    Really want to get cracking on this engine rebuild and get the car going (again) so help a chick out!

    Cheers,
    Dana
    Last edited by sillycar_chick; 14th February 2013 at 08:32 AM.

  2. #2
    Senior Member pt_y2k's Avatar
    Join Date
    May 2009
    Name
    Paul
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    301

    Default

    Have a crankshaft pulley here $80,located in logan. 0416 821 079

  3. #3
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I have a pair of cams here for $30, pulleys extra.

    $20 for that bearing cradle

    Postage shouldn't be too bad.

    Be careful changing those bearing caps as you probably meant to remachine them after changing.

    That cooling kit still working for you?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  4. #4
    Junior Member
    Join Date
    Apr 2010
    Name
    Dana
    State
    Qld
    Location
    Ipswich
    Country
    Australia
    Posts
    6

    Default

    pt_y2k: just want to check its the timing belt pulley you have? Not the water pump/alternator belt pulley thanks.

    Sam, cams sound good, I'll talk to you about them over email since there's the other stuff I need off you
    Last edited by sillycar_chick; 13th February 2013 at 02:07 PM.

  5. #5
    Senior Member pt_y2k's Avatar
    Join Date
    May 2009
    Name
    Paul
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    301

    Default

    Have both...

  6. #6
    Junior Member
    Join Date
    Apr 2010
    Name
    Dana
    State
    Qld
    Location
    Ipswich
    Country
    Australia
    Posts
    6

    Default

    All good, just found out you can still get the timing gear new from Toyota for $40.50. Thanks anyway.

Similar Threads

  1. WTB: 20V ST Dizzy (Can be minus Rotor/Cap) [BNE]
    By Oly AE86 in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 7th November 2009, 06:30 PM
  2. 4AGE Crankshaft Pulley
    By DGLEVIN in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 2nd October 2009, 10:23 PM
  3. WTD 20v timing belt crank pulley
    By 99Westy in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 9th August 2009, 09:01 PM
  4. wtd: 4age Crankshaft!.
    By stanzzza in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 10th April 2009, 02:37 AM
  5. Crankshaft timing pulley for 20V
    By charlie_keto in forum Technical - Questions
    Replies: 10
    Last Post: 13th May 2008, 09:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •