Hi,

Adding the finishing touches to my KE70 4AGE swap.

I have an AE86 S-diff at the moment.
The entire tailshaft is from the same car.
Gearbox is t50

All of my research has told me that this should be fine.

However, I noticed that the yoke does not go into the gearbox as much as I expected it to (you can see the yoke exposed slightly)
The bolt holes for the tailshaft center bearing line up fine.
So my thinking is that the front section of the tailshaft is a little too short...

Is there a slightly longer one in the AE71?

Anybody got any pics of a similar setup? I'll try to get a picture tonight.

Thanks