Hilux into t series

[corollaart]

Hi has any one tryed to fit a hilux centre in to a t series housing.

Yes i no one is 6.7 and the other 8inch,but why couldnt it be machined a tad.

Or may be fit hilux crown wheel and pinion to a t carrier?

Ive been told it has been done ,but cant remember which way they went about it.

Any one else hear of this??

Just looking for a lower ratio maybe 4.77 or 5.1 hilux gear seems to be easy to get than t series gears.

cheers rob

[Hen may possibly be a nut]

If it possible: No... Well anything's possible, but you're going to do some serious "adjustment" of the sheetmetal around the centre of the diff housing.

Is it worth it just to get a ratio: No. You can get new T ratios for not crazy money.

If you really want to be different then an E series centre will fit T housing with minor work. Then you can have a high ratio, but have no LSD options.

[JDMWheels]

A T Series 4.77 Centre is a few hundred dollars - I dare say you'd spend a lot more than that modifying a T Series housing professionally.

[corollaart]

Thanks guys ,it has been done but as you say may not be worth the effort.

Few hundred in australia ,please tell??

rob

[Skylar]

Not quite a few hundred but cheaper than doing all the work you proposed.

[JDMWheels]

I always forget that people associate a few hundred with $200 :|

^^ Weir is what i was talking about -

4.30, 4.778 Ratios $318.60
**NEW** 5.13 ratio $389.00

^^

[slide86]

this is a corolla forum remember.......