Results 1 to 7 of 7

Thread: KE70 High Roof Wagon Slant Front Rolling Shell - BNE

  1. #1
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default KE70 High Roof Wagon Slant Front Rolling Shell - BNE

    Going up for sale is my old project. SOLD
    KE70 High Roof 4 Door Wagon Rolling Shell
    Slant Front
    Driver and Passenger wind deflectors
    KE70 struts with lowered pedders front springs and slotted disc's
    KE70 lower control arms with nolathane bushes, Ball joints have been replaced recently.
    Stock rear suspension
    4K engine x member and pedal box
    Stock Radiator
    Has hole cut for AE71 clutch master cyl.
    Full brown interior in GC
    Stock BW wagon diff
    16" rims, one is bald and has slow leak, goes down over night.
    No Motor/Gearbox/Tailshaft/Exhaust


    Price $500 firm
    Will swap for something of interest, aftermarket ECU, T2 flange 4A exhaust manifold, T/G/F series diff, W Series box, set/pair of work, volk or SSR in decent off set and width......Whatcha got?
    0468 371 779
    EDIT: Chermside, QLD
    Last edited by Futo_gt86; 22nd March 2013 at 04:46 PM.

  2. #2
    Senior Member J0RD0's Avatar
    Join Date
    Feb 2010
    Name
    Jordan
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    369

    Default

    LOL! what is going on man? can you finish one build?

    Ill buy a wagon and finish it . . .
    no wait, ill supercharge the 20v . . .
    no wait, ill pull the 20v out and put a 4agte in
    no wait, ill build a 1uz hilux
    no wait, ill abandon the 1uz hilux . . .
    no wait, ill re-shell the wagon . . .

    Missus must love you?
    THE EVOROLLA none of this SR shit . . . EVO 7 powered bitches

    https://www.facebook.com/KeConversions

    KE conversions - making your conversion simple

    4AGE CA18 SR20 BEAMS 1UZ to KEXX mounting kits and hydraulic pedal box's available

  3. #3
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default

    LOL - What you volunteering to lend a hand Jordo?

    Yeah, Missus love me, but she said Wagon has to go!
    I wanted to put 4K in it and get it running before I sold, but I been told.

    Work has been full on, just haven't had time to get to it all.
    Missus and kid, and daily drop a leg out of bed...Priorities.
    That took away all kitty saved to finish them off, just starting to get back on top of it all.
    1UZ lux is still on, have been working on it, just havent post it.
    I wasn't happy with it, but got it sorted now with help from Car Tune Company parts from NZ.
    Its sitting in the shed 80% wired, just need COR and Fuel pump and need exhaust sorted - 2 weeks holidays effective of tomorrow time to finish it.

    It was Sam (razorback ECU) who convinced me I was going to blow the 20V up with the SC14, So options were to go forged (too expensive) or, get GZE block.
    Wagon was to be track only, but i as I progressed I decided I was going to rego it.
    Allways wanted Pano, settled for wags - Pano came up for right coin with mod plates, can you blame me? I mean look at it.
    Last edited by Futo_gt86; 18th March 2013 at 07:05 PM.

  4. #4
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default

    Bump.
    Last edited by Futo_gt86; 19th March 2013 at 10:27 PM.

  5. #5
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default

    Bump new picture up, as it sits currently.
    Last edited by Futo_gt86; 22nd March 2013 at 04:47 PM.

  6. #6
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default

    Includes spare headlights as well as gearbox mount and 4K charcoal canister.
    Driver side rear door shows window winder not installed, as its in glove box, there is no circlip for it.
    Last edited by Futo_gt86; 25th March 2013 at 10:10 PM.

  7. #7
    Senior Member Futo_gt86's Avatar
    Join Date
    Mar 2011
    Name
    Ali
    State
    QLD
    Location
    4300
    Country
    Australia
    Posts
    728

    Default

    SOLD THANKS!

Similar Threads

  1. (BNE) jzz30 rolling shell with coilovers
    By milan_ke70 in forum Cars for Sale (Toyota Only)
    Replies: 5
    Last Post: 16th January 2013, 10:04 PM
  2. [QLD] Legit Nanna KE70 slant front low top wagon $1250
    By 4DRFRK in forum Cars for Sale (Toyota Only)
    Replies: 0
    Last Post: 3rd July 2012, 01:25 AM
  3. SA: 1983 AE70 high roof wagon
    By JinxD in forum Cars for Sale (Toyota Only)
    Replies: 2
    Last Post: 5th March 2012, 04:37 AM
  4. (SA) KE70 Wagon High Roof - AE86 struts and brakes - reverse mesh wheels
    By KSUP71 in forum Cars for Sale (Toyota Only)
    Replies: 8
    Last Post: 4th March 2012, 08:36 PM
  5. '86 Sigma high-roof wagon
    By benzo in forum Cars for Sale (Not Toyotas)
    Replies: 8
    Last Post: 22nd December 2010, 05:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •