Hi all, Im currently changing over from an ADM 4AC to a JDM Bigport motor out of a Zenki trueno coupe. I'm having some trouble identifying some plugs on the JDM loom with regards to some heater components and the area behind the glove box.
The conversion is from ADM dash cluster to JDM digital dash cluster.
I've taken some pictures to help with my explanation.
Here in Image 1 i've got just an overall view of each part of the harness. ADM is the top harness, JDM Below. The plugs linked with red lines I have sorted out, my main concern is with plugs A and B from the ADM loom, and plugs 1,3,4 and the flasher relay on the JDM Loom.
In the ADM loom the connector for plug A comes from behind the firewall, and connects to the wiper motor.
It appears as if the green plug B connects to a fan speed controller behind the glovebox. However, the JDM loom is lacking this plug.
The next three images are details views of plugs, 1, the flasher relay, and plug A.
Plug 1
Flasher Relay
Plug A, note that it is 3 pins.
Now this final image are plugs within the car on the JDM Loom.
The plug labelled A? fits into plug A on the ADM loom, however on the ADM it's 3 pins rather than 5. Plug 3 fits with female connector 3 on the JDM loom, and I cant find a match for plug 5.
Now my main questions and concerns
Why doesn't my JDM loom have a green fan controller plug?
What does plug 1. do? And why can't I find anywhere to plug it in?
Why does my ADM loom not have a flasher relay here, considering that previously my hazards were working?
What has been deleted from my ADM loom?
Why is plug A differen't between the looms?
How should I proceed with my conversion from here?