Rob's KE70

[ghostintheshell95']

kp61 ; ) do it

[RobertoX]

Maybe another 86 and have another crack at racing in class N1 (see my other thread)
I need a more dedicated race car though, my last one was still too much of a compromise for street use...
KP61 is also cool but still pretty rare over here. Don't worry, when I get another car there will be a more detailed build thread.

[RobertoX]

Deposit put down on an 86 levin coupe.
Basically a dedicated track car which i'll put a bit of extra work into.
Aim will be to be competitive in the N1 class. New thread to come soon...

[AJPS]

how much japanese do you speak

also what are the n1 class rules

[RobertoX]

I speak a reasonable amount but am definitely no expert. I have to work in japanese every day though.

N1 is basically set up to have a pretty level playing field and not be too expensive.

Engine: std cams and inlet manifold, including throttle body. Must be bigport. The motor i am building is getting 1mm os pistons, some lightening and balancing. Also decked block and thin HG.

Tyres: control tyre varies each year depending on sponsor. This year it is Dunlop direzza in 14 or 15 inch

Suspension: no lca change, all body mount points have to be std. Coilovers and adjustable rear arms are ok.

Brakes: std vented rotors and discs. Slotted or drilled is ok and high temppads are ok.

Body: shell panels have to be std but hood, trunk and fender change is ok. My car is fully stitch welded.

[AJPS]

Sounds cool. Stock ecu I guess?

[RobertoX]

Yeah sorry, forgot about that one, stock ecu only. But most guys stuff around with the sensors by putting resistors in various places to get it to run a bit richer.
Pretty nasty way of tuning but you can get a touch more power and more importantly keep the temps down.

[slide86]

Sounds like fun, id really like to get into something like that.......but Australia

[AJPS]

a well respected tuner in sa swears by diode and resistor tuning

but he is very very old school and his knowledge was learned before you could buy tunable ecus

[RobertoX]

Hey I started a new thread, check it out if you're interested: