Results 1 to 7 of 7

Thread: Digital Dash Pinout

  1. #1
    Senior Member
    Join Date
    Dec 2008
    Name
    Dim
    State
    NSW
    Location
    Menai
    Country
    Australia
    Posts
    887

    Default Digital Dash Pinout

    Trying to wire up my Digital Dash, however the only two wiring diagrams I have Indicate the left and right plug on the cluster. Can anyone tell me the pinout for the BACK plug on the instrument cluster as that's all I have to work with?

    The main issue is the number of pins and the arrangement is skightky different between the diagrams for the left plug and the back plug.

    Back plug of custer, notice that directly opposite where the tab is theres only one pin, whereas on the following wiring diagrams the left plug(connector B) has 2 pins opposite the locking tab.



    Wiring diagrams



    If mpbpdy has a pinout can someone give me a method to test?

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Name
    Dim
    State
    NSW
    Location
    Menai
    Country
    Australia
    Posts
    887

    Default

    Just a little bump on this. Have got the cluster working but 3 wires on connector B aren't hooked up.
    I have no connector for the ones marked: 12. W-B Fuel sender ground (it's earthed on another wire), 6. B-W Starter (ignition switch st1) as it says it's unecessary, 4. EFI Computer (no idea what this would do)

    Also, for the speedo to work does it only need ignition power, a functioning speedo cable and for the cluster to be earthed on 'Pin 2. BR Ground (JB NO.1 SET BOLT)' Or will it need something additional?

  3. #3
    Member
    Join Date
    Mar 2011
    Name
    Ced
    State
    VIC
    Location
    Rowville
    Country
    Australia
    Posts
    80

    Default

    Wow, you did really well without the adaptor plug for that back connector.

    I'm going to attempt to label that back connector:

    |01 |02 |03 |04 |__ |05 |06 |07 |08 |
    |09 |10 |11 |12 |13 |14 |15 |16 |17 |

    12 WB Fuel Sender ground goes to 16
    6 BW Starter goes to 03
    4 EFI there's no connection, but for some reason the adaptor plug has a wire going to 05

    Let me know if you want a comprehensive list of where the other wires go to
    Last edited by Matt; 11th July 2013 at 09:13 AM. Reason: fixed 08|

  4. #4
    Member
    Join Date
    Mar 2011
    Name
    Ced
    State
    VIC
    Location
    Rowville
    Country
    Australia
    Posts
    80

    Default

    If you're seeing a surprised faced emoticon as part of the diagram, it's meant to be an '08'. Didn't realise it 8+| would =

    Also, I missed the second part of your question. You're right, the speedo will function without any extra modules. What's different is the oil pressure & fuel level sensors. You'll need to get digital versions of these for the dash to function correctly for those corresponding features. You should be able to get these parts new if need be.
    Last edited by hayashi; 9th July 2013 at 12:11 AM.

  5. #5
    Member z_brutalis's Avatar
    Join Date
    Jun 2009
    Name
    Robert
    State
    VIC
    Location
    Kealba
    Country
    Australia
    Posts
    97

    Default

    Hey guys im about to do a digi dash conversion myself was just wondering what plug is plug a and plug b on the digi dash.

  6. #6
    Member
    Join Date
    Mar 2011
    Name
    Ced
    State
    VIC
    Location
    Rowville
    Country
    Australia
    Posts
    80

    Default

    If you're looking at the dash from the front, plug A is the right plug, plug B is the left. Although it really depends which diagram you're using.

  7. #7
    Member z_brutalis's Avatar
    Join Date
    Jun 2009
    Name
    Robert
    State
    VIC
    Location
    Kealba
    Country
    Australia
    Posts
    97

    Default

    hey hayashi my clusters fuel and temp does not light up is there a reason for it. please tell me the cluster is not burnt out

Similar Threads

  1. Digital dash
    By khai2298 in forum Technical - Questions
    Replies: 7
    Last Post: 23rd March 2011, 06:58 PM
  2. Anyone with a Digital Dash?
    By Stain in forum Technical - Questions
    Replies: 2
    Last Post: 28th December 2010, 04:28 PM
  3. A/M Digital Dash??
    By Beau in forum Technical - Questions
    Replies: 0
    Last Post: 5th March 2009, 11:00 AM
  4. Digital dash
    By Touge205 in forum General Topics (No Technical Questions)
    Replies: 5
    Last Post: 30th November 2006, 08:58 PM
  5. Digital Dash
    By Monk in forum Technical - Questions
    Replies: 7
    Last Post: 11th November 2006, 11:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •