Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Reconditioned small port head, Toda springs and shim less bucket conversion. (Perth WA)

  1. #1
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default Reconditioned small port head, Toda springs and shim less bucket conversion. (Perth WA)

    Hey Guys

    I have a small port head off my spare motor up for sale.

    Head did 500kms on an engine and the engine was stripped to do more work. Heads in great shape and has mild port work, water jacket areas are perfect and fire deck is good. Comes with Toda HD valves springs and is fitted with a shim less bucket conversion. A few of the buckets looked a little average so I have 10 new buckets still in the packets.

    I'm looking for $500 for the head without the shim less buckets or $750 with the buckets. If the head sells without the buckets I will sell the for $300 on there own. Head has had the springs etc removed for inspection but will be reassembled when purchased.

    Looking for local pickup in Perth or will assist with shipping. I will post pics later tonight or can send pics to interested parties.








    Last edited by Prime86; 2nd September 2013 at 11:36 PM. Reason: Picss of water jacket area added

  2. #2
    Veteran joeschmo_57's Avatar
    Join Date
    Jan 2009
    Name
    Joe
    State
    NT
    Location
    Nightcliff
    Country
    Australia
    Posts
    1,593

    Default

    Have you got any photos of the porting by any chance!
    Quote Originally Posted by Jdm-Mcc View Post
    quit hatin get bakin!

  3. #3
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default

    Pic's added mate

    Port work was only minor on this head to match port the quad throttle body adaptor to the head and a bit around the valve seats.

    I will have the complete intake system up for sale too that is a very nice setup. T3 adaptor, silvertop throttles, TWM 65mm volocity stacks all with stainless fastners.

    Heres a pic of the spare engine with the head and intake.


  4. #4
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default

    $600 takes the head with shim less bucket conversion as is.

  5. #5
    Junior Member
    Join Date
    Oct 2012
    Name
    Adrian
    State
    NSW
    Location
    Armidale
    Country
    Australia
    Posts
    14

    Default

    Hi mate I'm pretty keen on the head just working out whether it's worth getting the shim-less buckets as well, I'm running stock smallport ECU and intake so maybe my revs would never be high enough to need them???

  6. #6
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default

    The head is setup with the shim less buckets already. It's fine to run shim less buckets with stock everything if you want it just means your able to put big cams and big RPM through the motor if you want.

  7. #7
    Junior Member
    Join Date
    Oct 2012
    Name
    Adrian
    State
    NSW
    Location
    Armidale
    Country
    Australia
    Posts
    14

    Default

    OK so for the $600 I would have a head I can put my standard cams into and have correct valve clearances ready to go straight onto my block after it gets back from the engine builder?

  8. #8
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default

    For $600 you would have a complete head yes but I have the springs etc out of it at the moment. Valves buckets etc are in the head in the correct positions so just have to put the springs in and go. All springs collets are in bags clearly labeled ready to go back in.

  9. #9
    Junior Member
    Join Date
    Sep 2013
    Name
    Neil
    State
    South Island
    Location
    Timaru
    Country
    New Zealand
    Posts
    0

    Default

    Hi Prime86, Im Neil from New Zealand. Would you be interested in shipping your head to New Zealand? Would you also consider selling the Head complete with shimless buckets, Toda Valve Springs. T3 Manifold adaptor, ITB's, Trumpets? Would you have a price in mind for the complete setup? Cheers Neil.

  10. #10
    Senior Member Prime86's Avatar
    Join Date
    Sep 2009
    Name
    Brad
    State
    WA
    Location
    Perth hills
    Country
    Australia
    Posts
    233

    Default

    Yeah woul be willing to post at buyers expense. Intake has been sold already sorry Neil.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. WA 16v small port
    By racermotors in forum Car Parts For Sale
    Replies: 2
    Last Post: 31st May 2011, 11:37 PM
  2. Big Port To Small Port Conversion???
    By ae8616v in forum Technical - Questions
    Replies: 7
    Last Post: 18th May 2011, 07:34 PM
  3. Small Port Head
    By 83ae86 in forum General Topics (No Technical Questions)
    Replies: 3
    Last Post: 10th September 2007, 02:19 PM
  4. Replies: 2
    Last Post: 3rd January 2007, 08:52 AM
  5. big port head and small port
    By Clinton in forum Technical - Questions
    Replies: 1
    Last Post: 20th August 2006, 09:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •